Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroŻywica epoksydowa 750g Dragon
Żywica epoksydowa 750g Dragon
waterproof
Two-component epoxy composition with a universal spectrum of action.
Creates a clear, transparent coating with excellent smoothness, high gloss and good abrasion resistance.
Product available in stores
Żywica epoksydowa 750g Dragon
Two-component epoxy composition with a universal spectrum of action.
Creates a clear, transparent coating with excellent smoothness, high gloss and good abrasion resistance.
waterproof
APPLICATION:
Intended for engineering, craft and artistic applications.
Used for the production of solvent-free coatings, laminates (including with glass fibre or sand added), decorative objects, artistic works, preparation of putties and anti-corrosion putties, impregnation, strengthening and protection of concrete against dust.
Find out how to take advantage
- 1 Thoroughly clean, dust off and degrease the surfaces.
- 2 Weigh the required amount of resin into a clean container, then weigh out the hardener. Maintain a ratio of 2 parts resin : 1 part hardener.
- 1 Mix the ingredients together for approx. 2 min.
- 2 Be careful not to introduce too much air while mixing.
- 3 The prepared mixture should be used within several minutes.
- 4 Use a plastic spatula to ensure even distribution.
- 5 Close the container with resin and hardener tightly after finishing work.
- A temperature below 20°C significantly extends the hardening time.
- Full mechanical curing is achieved 7 days after use.
- Clean dirty tools and fresh stains with acetone.
- Dried resin can only be removed physically.
- The resin has a small tendency to crystallise during storage; this is a natural phenomenon and does not affect the properties of the product in any way.
- In the event of crystallisation, heat the resin to 50-60°C and mix.
Technical data
| SKU | DZYE750 |
|---|---|
| Ean | 5903649056726 |
| Grammage | 750g |
| Color | Transparent |
| Type of bond | hard |
| Full bond strength | after 7 days |
| Efficiency | 0.5 - 1.0kg/m² |
| Initial hardening/drying time of the joint/coating | 30min |
| Joint/coating color after drying | pale yellow |
| Consistency | low viscosity |
Security
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.