Loading...

Smooth finish putty 1.5kg Dragon

Ready-to-use, slow-setting acrylic putty. Easy to apply and sand. A high-quality product that gives strong and durable surfaces. Ensures wall breathing. Does not muddy sandpaper. It creates an excellent base for painting. Water-soluble.
check
Finishing
check
It creates an excellent base for painting.
check
for indoor use
APPLICATION: It is used to smooth out unevenness on concrete, cement-lime and gypsum-lime surfaces. Perfect as a primer for emulsion, acrylic and phthalic paints. Recommended for smooth plastering. The product is intended for renovation, finishing and decorative works in construction.

Find out how to take advantage

    SUBSTRATE PREPARATION:
  • 1 Clean the surface, dust it and degrease it.
    • Application:
  • 1 Apply the next layer after the previous one is completely dry.
  • 2 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
  • 3 Mix the contents of the package well.
  • 4 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
  • 5 Apply the next layer after the previous one is completely dry.
  • 6 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
  • arrow-right Carry out work at temperature (10÷25)°C.
  • arrow-right Air humidity should be max. 70%.
  • arrow-right The drying time depends on the temperature and air humidity. 4 h
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
  • arrow-right In order to minimize the risk of microcracking, it is recommended to prime with DRAGON DEEP PENETRATING PRIMER after approx. 24 hours.
  • arrow-right The putty and primed surface can be painted with all types of paints.

Downloadable materials
No materials for the selected product
Technical data
SKU DGSF01_
Ean 5903649009203
Grammage 1.5kg
Applicability Interior
Efficiency 1-2m²/kg
Coating total drying time 12h.
Initial hardening/drying time of the joint/coating 4h.
Joint/coating color after drying White
Typ produktu acrylic
Security
  • Do not use in places exposed to direct contact with water.
  • It is not recommended to use the product in places exposed to elevated temperatures.
  • Keep out of reach of children.
  • During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
  • Protect against excessive heat and cold.
  • Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
  • Unused, tightly closed in its original packaging, it remains suitable for further use.
lzo_
Lets take care of the environment
VOC:
lzo_