Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroSilikon uniwersalny Dragon
Silikon uniwersalny Dragon
Permanently elastic
Water-resistant
Excellent adhesion
Universal silicone is a one-component, fast-hardening silicone binder, which in contact with atmospheric moisture creates an excellent elastic and non-shrink filling mass.
It is characterized by very good adhesion to glass, glaze, terracotta and ceramics.
It withstands large temperature differences, UV radiation, hot water, oils and fats.
Product available in stores
Silikon uniwersalny Dragon
Universal silicone is a one-component, fast-hardening silicone binder, which in contact with atmospheric moisture creates an excellent elastic and non-shrink filling mass.
It is characterized by very good adhesion to glass, glaze, terracotta and ceramics.
It withstands large temperature differences, UV radiation, hot water, oils and fats.
Permanently elastic
Water-resistant
Excellent adhesion
APPLICATION:
The product is intended for filling joints and gaps, sealing frames, doors, windows and kitchen appliances, especially in rooms with high humidity.
Recommended for sealing ceramic, porcelain and clinker tiles, sanitary ceramics, impregnated wood, glass, porcelain, anodized aluminum, stainless steel, enamelled surfaces.
The sealant cannot be used for aquariums, sticking mirrors to bituminous surfaces and sealing connections with plastics, i.e. Teflon, PE, PP.
Do not use on lead, zinc and copper.
Dostępne kolory
Find out how to take advantage
- 1 Align the joined surfaces, clean, dust and degrease.
- 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
- 3 Press out the silicone evenly, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
- 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
- 1 Level, dust, clean and degrease the joined surfaces.
- 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
- 3 Squeeze the silicone evenly from the cartridge, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
- 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
- 1 Align the joined surfaces, clean, dust and degrease.
- 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
- 3 Press out the silicone evenly, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
- 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
- 1 Level, dust, clean and degrease the joined surfaces.
- 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
- 3 Squeeze the silicone evenly from the cartridge, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
- 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
No usage data available for this product.
- READ BEFORE USE
- Before using the product, perform an adhesion test on the applied substrate.
- Carry out work at temperature (5÷40)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Dirty tools can be cleaned with DRAGON PRO silicone remover.
- Dried silicone can only be removed mechanically.
- READ BEFORE USE
- Before using the product, perform an adhesion test on the applied substrate.
- Carry out work at temperature (5÷40)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Dirty tools can be cleaned with DRAGON PRO silicone remover.
- Dried silicone can only be removed mechanically.
- READ BEFORE USE
- Before using the product, perform an adhesion test on the applied substrate.
- Carry out work at temperature (5÷40)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Dirty tools can be cleaned with DRAGON PRO silicone remover.
- Dried silicone can only be removed mechanically.
- READ BEFORE USE
- Before using the product, perform an adhesion test on the applied substrate.
- Carry out work at temperature (5÷40)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Dirty tools can be cleaned with DRAGON PRO silicone remover.
- Dried silicone can only be removed mechanically.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Curing rate | 1.5-3mm/48h |
| Elongation at break | ˃300% |
| Skinning time | (5÷25)min. |
| Type of bond | Elastic |
| Applicability | Interior |
| Joint/coating color after drying | White |
| Consistency | thixotropic paste |
| CERTIFICATION | The product has CE marking - meets the requirements of harmonized standard EN 15651-1:2012 |
Security
- Keep out of reach of children.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Transport and store upright in a tightly closed, original packaging at temp. (5÷27) °C.