Loading...

Silikon sanitarny Dragon

Sanitary silicone is a one-component, fast-hardening silicone binder, which in contact with atmospheric moisture creates an excellent elastic and non-shrink filling mass. It is characterized by very good adhesion to glass, glaze, terracotta and ceramics. It withstands large temperature differences, UV radiation, hot water, oils and fats.
Permanently elastic Permanently elastic
Water-resistant Water-resistant
Excellent adhesion Excellent adhesion
check
Resistant to aging, cracking and discoloring.
APPLICATION: The product is intended for sealing bathtubs, washbasins, shower trays, showers, sinks and other sanitary and kitchen appliances, for pointing ceramic tiles, especially in rooms with high humidity. Recommended for sealing ceramic, porcelain and clinker tiles, sanitary ceramics, impregnated wood, glass, porcelain, anodized aluminum, stainless steel, enamelled surfaces. The sealant cannot be used for concrete, marble, lead, zinc, copper, aquariums, gluing mirrors to bituminous surfaces and sealing joints with Teflon, PE, PP. ⚠️

Find out how to take advantage

  • 1 Level, dust, clean and degrease the joined surfaces.
  • 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
  • 3 Squeeze the silicone evenly from the cartridge, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
  • 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
  • 1 Level, dust, clean and degrease the joined surfaces.
  • 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
  • 3 Squeeze the silicone evenly from the cartridge, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
  • 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
  • 1 Align the joined surfaces, clean, dust and degrease.
  • 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
  • 3 Press out the silicone evenly, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
  • 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
  • 1 Align the joined surfaces, clean, dust and degrease.
  • 2 Protect the surfaces in the immediate vicinity of the places filled with silicone with masking tape.
  • 3 Press out the silicone evenly, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
  • 4 Shape the silicone surface and finally smooth it with a spatula soaked in water and soap or dishwashing liquid for about 10-15 minutes.
No usage data available for this product.
  • arrow-right READ BEFORE USE
  • arrow-right Before using the product, perform an adhesion test on the applied substrate.
  • arrow-right Carry out work at temperature (5÷40)°C.
  • arrow-right The temperature range of works concerns the temperature of air, substrate and glued elements.
  • arrow-right Dirty tools can be cleaned with DRAGON PRO silicone remover.
  • arrow-right Dried silicone can only be removed mechanically.
  • arrow-right READ BEFORE USE
  • arrow-right Before using the product, perform an adhesion test on the applied substrate.
  • arrow-right Carry out work at temperature (5÷40)°C.
  • arrow-right The temperature range of works concerns the temperature of air, substrate and glued elements.
  • arrow-right Dirty tools can be cleaned with DRAGON PRO silicone remover.
  • arrow-right Dried silicone can only be removed mechanically.
  • arrow-right READ BEFORE USE
  • arrow-right Before using the product, perform an adhesion test on the applied substrate.
  • arrow-right Carry out work at temperature (5÷40)°C.
  • arrow-right The temperature range of works concerns the temperature of air, substrate and glued elements.
  • arrow-right Dirty tools can be cleaned with DRAGON PRO silicone remover.
  • arrow-right Dried silicone can only be removed mechanically.
  • arrow-right READ BEFORE USE
  • arrow-right Before using the product, perform an adhesion test on the applied substrate.
  • arrow-right Carry out work at temperature (5÷40)°C.
  • arrow-right The temperature range of works concerns the temperature of air, substrate and glued elements.
  • arrow-right Dirty tools can be cleaned with DRAGON PRO silicone remover.
  • arrow-right Dried silicone can only be removed mechanically.
No read before use data available for this product.

Downloadable materials
No materials for the selected product
Technical data
SKU
Ean
Grammage
Curing rate 2.5mm/24 h
Elongation at break 350%
Skinning time 8-20min.
Type of bond Elastic
Applicability Interior
Joint/coating color after drying White
Consistency thixotropic paste
CERTIFICATION The product has CE marking - meets the requirements of harmonized standard EN 15651-3:2012
Security
  • Keep out of reach of children.
  • During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
  • Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.