Loading...

Sanitary acrylic White 280ml Dragon

One-component, highly flexible acrylic sealant with excellent adhesion and moisture resistance. For rooms with high humidity: kitchens, bathrooms, toilets, etc. It is easy to apply, does not run off during application and is mould resistant.
check
Mould-resistant
Flexible Flexible
check
For damp surfaces
check
Moisture resistant
APPLICATION: Designed for: masking of cracks and crevices on walls and ceilings, especially in sanitary areas sealing of joints between wall and shower, around ceramic and plastic (PVC) decorative elements Substrate types: PVC, ceramic, wood, glass, metal, stone. SEALING OF JOINTS AND GAPS

Find out how to take advantage

  • 1 Cut the cartridge outlet above the thread and screw the applicator, cut at an acute angle, to the width of the weld.
  • 2 Squeeze the sealant evenly from the tube by inserting it into the gaps with a slight excess, continuously leaving no gaps or voids.
  • 3 Immediately after application, smooth the joint with your finger or with a tool moistened, for example, in a soap solution. You can use, for example, a spatula for this purpose.
  • 4 After the work is finished, the packaging with the sealant should be tightly closed.
  • arrow-right Ensure that the surfaces to be sealed are clean, dry and degreased.
  • arrow-right In order to avoid contamination of the joint edges and also to achieve a straight joint line, tape the joint area with painter's tape.
  • arrow-right Be sure to remove the tape as soon as the work is finished, before the sealant cures.
  • arrow-right Carry out work at temperature (5÷40)°C.
  • arrow-right Minimum/maximum joint width must be 5 mm/25 mm.
    • The ratio of joint width to depth should preferably be 2:1.
  • 1 Excess uncured sealer and fresh stains can be removed with a damp cloth.
  • 2 Cured sealant can be removed mechanically.
  • 3 Protect the fresh joint from contact with moisture and water until it is completely dry.

Downloadable materials
No materials for the selected product
Technical data
SKU DAKS280
Ean 5903649086457
Grammage 280ml
Color White
Curing rate 2mm/24 h
Type of bond Elastic
Applicability Interior
Joint/coating color after drying White
Consistency paste
CERTIFICATION The product has an EMICODE® premium class EC1 PLUS certificate, confirming very low emissions of volatile organic compounds., The product has CE marking - meets the requirements of harmonized standard EN 15651-3:2012.
Security
  • The product is not suitable for expansion joints.
  • Keep out of reach of children.
  • Do not use for sealing in areas exposed to constant water.
  • Proceed in accordance with the method of use and notes on the packaging.
Storage and transport
  • Protect against excessive heat and cold.
  • Transport and store at temp. (5÷30) °C.