Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroMasa szpachlowa uniwersalna elastyczna Dragon
Masa szpachlowa uniwersalna elastyczna Dragon
Elastic
Ready-to-use acrylic filler, slow-binding and flexible.
Gives white, smooth and durable surfaces.
Ensures wall breathing.
Easy to apply and sand.
Water-soluble.
Very easy to process after drying.
The small grain diameter guarantees a high-quality finish.
Product available in stores
Masa szpachlowa uniwersalna elastyczna Dragon
Ready-to-use acrylic filler, slow-binding and flexible.
Gives white, smooth and durable surfaces.
Ensures wall breathing.
Easy to apply and sand.
Water-soluble.
Very easy to process after drying.
The small grain diameter guarantees a high-quality finish.
Elastic
APPLICATION:
The product is intended for renovation, finishing and decorative works in construction.
Recommended for smoothing unevenness on concrete, cement-lime, gypsum-lime and other typical substrates used in construction.
Advantages and benefits
Dostępne kolory
Find out how to take advantage
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Squeeze the right amount of mass from the tube, fill the defect, smooth it with a spatula within 5 minutes after applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents of the package well.
- 2 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Squeeze the right amount of mass from the tube, fill the defect, smooth it with a spatula within 5 minutes after applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
- 1 Clean the surface, dust it and degrease it.
- 1 Mix the contents of the package well.
- 2 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
Application:
No usage data available for this product.
- READ BEFORE USE
- Carry out work at temperature (10÷30)°C.
- Apply two coats when filling larger gaps.
- Apply layers up to 6 mm.
- The maximum depth of the putty is 8 mm.
- Clean dirty tools and remove fresh stains with warm water.
- Drying time depends on ambient temperature and humidity.
- READ BEFORE USE
- Carry out work at temperature (10÷30)°C.
- Apply two coats when filling larger gaps.
- Apply layers up to 6 mm.
- The maximum depth of the putty is 8 mm.
- Clean dirty tools and remove fresh stains with warm water.
- Drying time depends on ambient temperature and humidity.
- READ BEFORE USE
- Carry out work at temperature (10÷30)°C.
- Apply two coats when filling larger gaps.
- Apply layers up to 6 mm.
- The maximum depth of the putty is 8 mm.
- Clean dirty tools and remove fresh stains with warm water.
- Drying time depends on ambient temperature and humidity.
- READ BEFORE USE
- Carry out work at temperature (10÷30)°C.
- Apply two coats when filling larger gaps.
- Apply layers up to 6 mm.
- The maximum depth of the putty is 8 mm.
- Clean dirty tools and remove fresh stains with warm water.
- Drying time depends on ambient temperature and humidity.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Applicability | Interior |
| Efficiency | 0.5-0.7m²/kg |
| Coating total drying time | 6h |
| Joint/coating color after drying | White |
| Typ produktu | water-based |
| Consistency | paste |
| CERTIFICATION | The product has CE marking - meets the requirements of harmonized standard EN 15824:2017 |
Security
- Do not use putty in areas exposed to direct contact with water.
- It is not recommended to use the product in places exposed to elevated temperatures.
- Keep out of reach of children.
- Observe the basic rules of occupational hygiene when using the putty.
- In case of skin contact, rinse immediately with water.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Unused, tightly closed in its original packaging, it remains suitable for further use.
- Protect against excessive heat and cold.