Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroMasa szpachlowa naprawcza elastyczna Dragon
Masa szpachlowa naprawcza elastyczna Dragon
Elastic
High-quality, slow-setting, ready-to-use acrylic putty.
It gives white, smooth surfaces with increased resistance to cracking.
Very easy to process after drying.
Structural fibers make the walls easier to breathe.
Product available in stores
Masa szpachlowa naprawcza elastyczna Dragon
High-quality, slow-setting, ready-to-use acrylic putty.
It gives white, smooth surfaces with increased resistance to cracking.
Very easy to process after drying.
Structural fibers make the walls easier to breathe.
Elastic
APPLICATION:
The product is intended for renovation, finishing and decorative works in construction.
Used for filling inequalities, scratches, cracks, gaps and gaps in the substrate and for smoothing unevenness in concrete, cement-lime, gypsum-lime, etc. surfaces.
Perfect for filling plasterboard joints and as a base for emulsion, acrylic, silicone and phthalic paints.
Recommended for smooth plastering.
Dostępne kolory
Find out how to take advantage
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Squeeze the right amount of mass from the tube, fill the defect, smooth it with a spatula within 5 minutes after applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Squeeze the right amount of mass from the tube, fill the defect, smooth it with a spatula within 5 minutes after applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents of the package well.
- 2 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents of the package well.
- 2 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After it is completely dry - about 6 hours, the putty surface can be sanded and painted.
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
No usage data available for this product.
- READ BEFORE USE
- Thickness of a single layer applied 8 mm.
- The maximum depth of the putty is 12 mm.
- Apply two coats when filling larger gaps.
- Carry out work at temperature (10÷30)°C.
- The drying time depends on the temperature and air humidity.
- Clean dirty tools and remove fresh stains with warm water.
- Putty should not be used in places exposed to direct contact with water.
- When used outdoors, coat the surface of the putty with exterior paint after drying.
- READ BEFORE USE
- Thickness of a single layer applied 8 mm.
- The maximum depth of the putty is 12 mm.
- Apply two coats when filling larger gaps.
- Carry out work at temperature (10÷30)°C.
- The drying time depends on the temperature and air humidity.
- Clean dirty tools and remove fresh stains with warm water.
- Putty should not be used in places exposed to direct contact with water.
- When used outdoors, coat the surface of the putty with exterior paint after drying.
- READ BEFORE USE
- Thickness of a single layer applied 8 mm.
- The maximum depth of the putty is 12 mm.
- Apply two coats when filling larger gaps.
- Carry out work at temperature (10÷30)°C.
- The drying time depends on the temperature and air humidity.
- Clean dirty tools and remove fresh stains with warm water.
- Putty should not be used in places exposed to direct contact with water.
- When used outdoors, coat the surface of the putty with exterior paint after drying.
- READ BEFORE USE
- Thickness of a single layer applied 8 mm.
- The maximum depth of the putty is 12 mm.
- Apply two coats when filling larger gaps.
- Carry out work at temperature (10÷30)°C.
- The drying time depends on the temperature and air humidity.
- Clean dirty tools and remove fresh stains with warm water.
- Putty should not be used in places exposed to direct contact with water.
- When used outdoors, coat the surface of the putty with exterior paint after drying.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Applicability | Interior |
| Efficiency | 0.5-0.7m²/L |
| Coating total drying time | 6h |
| Joint/coating color after drying | White |
| Typ produktu | water-based on acrylic dispersion |
| Consistency | high viscosity paste |
Security
- Familiarize yourself with the product's application.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
- Keep out of reach of children.
Storage and transport
- Protect against excessive heat and cold.
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Unused, tightly closed in its original packaging, it remains suitable for further use.