1 Squeeze with your fingers to mix the contents of the tube.

2 Fill in the defect and then smooth the surface with a wet spatula.

3 Apply the next layer after the previous one is completely dry.

4 Tightly close the package after finishing work.

1 Squeeze with your fingers to mix the contents of the tube.

2 Fill in the defect and then smooth the surface with a wet spatula.

3 Apply the next layer after the previous one is completely dry.

4 Tightly close the package after finishing work.

1 Squeeze with your fingers to mix the contents of the tube.

2 Fill in the defect and then smooth the surface with a wet spatula.

3 Apply the next layer after the previous one is completely dry.

4 Tightly close the package after finishing work.

1 Squeeze with your fingers to mix the contents of the tube.

2 Fill in the defect and then smooth the surface with a wet spatula.

3 Apply the next layer after the previous one is completely dry.

4 Tightly close the package after finishing work.

READ BEFORE USE

The filled substrate should be dry, clean, degreased, free of coats of varnish and non-substrate material.

Use at a temperature above 10°C.

Fill cavities with a depth of more than 2 mm in layers (2 or 3 layers depending on the size of the cavity).

If the cavity is of a greater depth, we recommend partially clogging it with, for example, string or twine to reduce the depth of the filling.

After complete drying - approx. 24 hours (depending on temperature and humidity), the putty can be sanded and painted.

Clean dirty tools and remove fresh stains with warm water.

Before applying varnish coatings, stains and other impregnations, make a covering test.

When used outdoors, the surface should be protected with a layer of paint or varnish.

The color shown on the package may slightly differ from the obtained effect due to the printing technique used.

READ BEFORE USE

The filled substrate should be dry, clean, degreased, free of coats of varnish and non-substrate material.

Use at a temperature above 10°C.

Fill cavities with a depth of more than 2 mm in layers (2 or 3 layers depending on the size of the cavity).

If the cavity is of a greater depth, we recommend partially clogging it with, for example, string or twine to reduce the depth of the filling.

After complete drying - approx. 24 hours (depending on temperature and humidity), the putty can be sanded and painted.

Clean dirty tools and remove fresh stains with warm water.

Before applying varnish coatings, stains and other impregnations, make a covering test.

When used outdoors, the surface should be protected with a layer of paint or varnish.

The color shown on the package may slightly differ from the obtained effect due to the printing technique used.

READ BEFORE USE

The filled substrate should be dry, clean, degreased, free of coats of varnish and non-substrate material.

Use at a temperature above 10°C.

Fill cavities with a depth of more than 2 mm in layers (2 or 3 layers depending on the size of the cavity).

If the cavity is of a greater depth, we recommend partially clogging it with, for example, string or twine to reduce the depth of the filling.

After complete drying - approx. 24 hours (depending on temperature and humidity), the putty can be sanded and painted.

Clean dirty tools and remove fresh stains with warm water.

Before applying varnish coatings, stains and other impregnations, make a covering test.

When used outdoors, the surface should be protected with a layer of paint or varnish.

The color shown on the package may slightly differ from the obtained effect due to the printing technique used.

READ BEFORE USE

The filled substrate should be dry, clean, degreased, free of coats of varnish and non-substrate material.

Use at a temperature above 10°C.

Fill cavities with a depth of more than 2 mm in layers (2 or 3 layers depending on the size of the cavity).

If the cavity is of a greater depth, we recommend partially clogging it with, for example, string or twine to reduce the depth of the filling.

After complete drying - approx. 24 hours (depending on temperature and humidity), the putty can be sanded and painted.

Clean dirty tools and remove fresh stains with warm water.

Before applying varnish coatings, stains and other impregnations, make a covering test.

When used outdoors, the surface should be protected with a layer of paint or varnish.

The color shown on the package may slightly differ from the obtained effect due to the printing technique used.