1 Cut off the tip and insert the dosing nozzle.

2 Apply the sealant evenly, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.

3 After applying the grout, smooth it with e.g. a spatula within 5-10 minutes.

4 ⚠️

5 Seal container tightly after completion of work.

1 ⚠️

2 After applying the grout, smooth it with a trowel, for example, within 5 - 10 minutes.

3 Clean dirty tools and fresh stains with water.

4 Dried sealant can only be removed mechanically.

5 After the work is finished, the packaging with the sealant should be tightly closed.

READ BEFORE USE

The surfaces should be free of dust, grease, oil, etc.

Carry out work at temperature (10÷30)°C.

When used outdoors, make sure that the filled gaps are not exposed to water within 5 hours, and then they are protected against direct rainfall.

The time of full hardening, depending on the thickness of the joint, is from 1 to 5 days.

READ BEFORE USE

The surfaces should be free of dust, grease, oil, etc.

Carry out work at temperature (10÷30)°C.

When used outdoors, make sure that the filled gaps are not exposed to water within 5 hours, and then they are protected against direct rainfall.

The time of full hardening, depending on the thickness of the joint, is from 1 to 5 days.