Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej termoodporny 40ml Dragon
Klej termoodporny 40ml Dragon
Water-resistant
A universal, heat-resistant adhesive that bonds, seals and repairs.
It is ideal for connections exposed to difficult or extreme conditions and very high temperatures up to +1000°C.
Resistant to dilute acids, water and exhaust fumes.
It is characterized by high adhesion and short setting time.
No harmful chemicals are released during curing.
Product available in stores
Klej termoodporny 40ml Dragon
A universal, heat-resistant adhesive that bonds, seals and repairs.
It is ideal for connections exposed to difficult or extreme conditions and very high temperatures up to +1000°C.
Resistant to dilute acids, water and exhaust fumes.
It is characterized by high adhesion and short setting time.
No harmful chemicals are released during curing.
Water-resistant
APPLICATION:
Designed for sealing and repairing exhaust systems in motor vehicles, for repairing and sealing damaged brick, concrete, ceramic or metal conduits for exhaust gases and liquids.
Not suitable for gluing PP, PE and PTFE materials, styrofoam.
Find out how to take advantage
- 1 Clean the glued surfaces thoroughly from dust, grease, grease, rust and other contaminants that may reduce adhesion.
- 2 Use a spatula to apply a 1-2 mm layer of glue to the damp surface.
- 3 Level the surface.
- 4 Wait approx. 1 h.
- 5 Then, after the glue has dried, apply a second layer.
- 6 The binding can be accelerated by heating the connection with warm air.
- 7 After completing the work, close tightly the packaging with glue.
- Before applying, check the action of the adhesive on the glued elements.
- Carry out work at temperature (10÷30)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Clean dirty tools and remove fresh stains with warm water.
- Remove dried dirt with an appropriate implement.
- The full strength of bond is obtained after approx. 24 h.
Technical data
| SKU | DKT040/BL |
|---|---|
| Ean | 5903649059871 |
| Grammage | 40ml |
| Type of bond | hard |
| Coating total drying time | 24h |
| Initial hardening/drying time of the joint/coating | 2h |
| Joint/coating color after drying | grey |
| Typ produktu | Silicate |
| Consistency | paste |
Security
- The adhesive is not a construction adhesive, it is not intended to carry significant stresses.
- Proceed in accordance with the method of use and notes on the packaging.
- The product is not intended for use on surfaces in direct contact with food.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Transport and store at temp. (5÷30) °C.
Lets take care of the environment
VOC:
Category B;
Bodyfiller/stopper;
All types,
the maximum permitted VOCs are 250 g/L,
the maximum VOC in the product is ˂1 g/L.
