Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej silikonowy do luster bezbarwny 280ml Dragon
Klej silikonowy do luster bezbarwny 280ml Dragon
Flexible
High-quality adhesive based on neutral silicone.
Creates flexible, waterproof joints with excellent adhesion to typical substrates in construction.
Ideal for mounting glass surfaces to various substrates used in construction.
Can be used on surfaces exposed to shocks and vibrations.
Product available in stores
Klej silikonowy do luster bezbarwny 280ml Dragon
High-quality adhesive based on neutral silicone.
Creates flexible, waterproof joints with excellent adhesion to typical substrates in construction.
Ideal for mounting glass surfaces to various substrates used in construction.
Can be used on surfaces exposed to shocks and vibrations.
Flexible
APPLICATION:
Designed for fixing all types of mirrors, mirror mosaics and decorative glass to mineral substrates (plaster, concrete, cement and gypsum boards), wood-like (OSB, MDF), glass and ceramic (ceramic tiles, gres).
It can be used for grouting of mirror edges.
It does not stick to plastic: PP, PE, PTFE.
Find out how to take advantage
- 1 The glued surfaces should be thoroughly cleaned, dusted and degreased.
- 2 Using masking tape to protect surfaces in the immediate vicinity of the glued areas.
- 3 Cut off the tip of the cartridge and attach the dispensing spout.
- 4 Apply the glue in parallel, vertical strips 5 - 10 mm thick on the element to be glued.
- 5 Leave spaces of approximately 10 cm between the strands.
- 6 Place the mirror against the wall and press evenly, leaving a ventilation gap to provide the moisture necessary for the glue to harden.
- 7 Glued parts can be positioned without tearing off by approximately 10 min from the application of glue.
- 8 The glued element should be immobilized while the glue sets.
- 9 In the case of small elements, horizontal tape protection is sufficient, while for larger and heavier objects stability must be ensured through appropriate supports.
- 10 After completing the work, close tightly the packaging with glue.
- Carry out work at temperature (5÷30)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Before applying, check the action of the adhesive on the glued elements.
- Adjust the strip thickness, amount of glue applied and fixation time to the size and weight of the glued element.
- Do not seal the edges of the mirror until the silicone has hardened.
- The full strength of bond is obtained after approx. 24 - 48 hours. Do not remove the supporting protection until it hardens.
- Clean contaminated tools and fresh stains with gasoline.
- Remove dried dirt with an appropriate implement.
Technical data
| SKU | DKSLU280 |
|---|---|
| Ean | 5903649060334 |
| Grammage | 280ml |
| Color | Transparent |
| Curing rate | 4mm/24 h |
| Elongation at break | 500% |
| Skinning time | 6-8min |
| Type of bond | Elastic |
| Applicability | Interior |
| Joint/coating color after drying | Transparent |
| Consistency | paste |
Security
- It is not intended for use on surfaces that come into direct contact with food.
- Keep out of reach of children.
- Do not use on bituminous substrates and those in constant contact with water.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.