Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej montażowy drewno-korek Transparent 280ml Dragon
Klej montażowy drewno-korek Transparent 280ml Dragon
Ready-to-use adhesive with paste consistency for finishing works in construction, with excellent starting adhesion to typical substrates.
Does not contain organic solvents.
It creates a colourless weld after drying.
Klej montażowy drewno-korek Transparent 280ml Dragon
Ready-to-use adhesive with paste consistency for finishing works in construction, with excellent starting adhesion to typical substrates.
Does not contain organic solvents.
It creates a colourless weld after drying.
APPLICATION:
Designed for gluing wooden skirting, window sills, thresholds, etc. and decorative elements made of various materials, such as cork, wood and stone to concrete, cement-lime, gypsum, plasterboard, plaster and other substrates, both porous and non-porous, and to chipboards , fibreboard and composite boards etc.
Intended for both indoor and outdoor use.
It does not stick to plastic: PP, PE, PTFE.
Advantages and benefits
Find out how to take advantage
- 1 Clean the glued surfaces carefully, dust and degrease with acetone.
- 2 Clean away any remnants of earlier painting.
- 3 Fit the surfaces together as best as possible.
- 4 Cut off the tip and insert the dosing nozzle.
- 5 Apply the adhesive in points or stripes on the substrate or the element being glued.
- 6 In addition, apply a drop on the corners and ends of glued objects.
- 7 Connect the glued elements and press them together for about 30 s.
- 8 Remove any excess glue.
- 9 Glued parts can be positioned without tearing off by approximately 10 min from the application of glue.
- 10 If the elements are under tension or are particularly heavy, immobilise them until the glue fully hardens.
- 11 After completing the work, close tightly the packaging with glue.
- Carry out work at temperature (10÷30)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- The full strength of bond is obtained after approx. 24 h.
- At least one of the glued surfaces must be porous and absorbent.
- Before applying, check the action of the adhesive on the glued elements.
- Clean dirty tools and remove fresh stains with warm water.
- Dried glue can only be removed physically with a suitable implement.
Technical data
| SKU | DKMDK280/EH03 |
|---|---|
| Ean | 5903649082756 |
| Grammage | 280ml |
| Color | Transparent |
| Type of bond | Elastic |
| Full bond strength | 24h |
| Applicability | interior or exterior |
| Efficiency | 1.5-3m²/L |
| Initial hardening/drying time of the joint/coating | 30min |
| Joint/coating color after drying | Transparent |
| Typ produktu | water-based |
| Consistency | paste |
Security
- It is not intended for use on surfaces that come into direct contact with food.
- Keep out of reach of children.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Frozen glue loses its properties permanently.