Loading...

Ceramic-concrete-wood mounting adhesive 280ml Dragon

A ready-to-use paste adhesive. Creates a durable joint with excellent adhesion to typical substrates in construction. Does not contain organic solvents.
Flexible Flexible
check
Moisture-resistant
check
Durable
check
Suitable for sensitive materials
The product is intended for gluing elements made of ceramics, glaze, terracotta, natural and artificial stones, wood and wood-like materials, cork, polystyrene, floor coverings to typical substrates used in construction, e.g. concrete, lime, gypsum-cardboard, ligno-cement, plaster and other.
Advantages and benefits
check
Does not contain organic solvents.
check
Cream
check
Durable
check
Suitable for sensitive materials
check
Initial bonding time: 1 h.
check
Thermal resistance: (-15÷60) °C.
check
Flexible

Find out how to take advantage

  • 1 Align the glued surfaces, adjust them to each other, dust and degrease
  • 2 Remove old paintwork with DRAGON "Paint and varnish remover".
  • 3 Cut off the tip of the cartridge and attach the dispensing spout.
  • 4 Apply the adhesive in points or stripes onto the glued element.
  • 5 Connect and press firmly through 30 s.
  • 6 Glued parts can be positioned without tearing off by approximately 10 min from the application of glue.
  • 7 If the elements are under tension or are particularly heavy, immobilise them until the glue fully hardens.
  • 8 Clean dirty tools and remove fresh stains with warm water.
  • 9 Dried glue can only be removed physically with a suitable implement.
  • 10 After completing the work, close tightly the packaging with glue.
  • arrow-right Carry out work at temperature (5÷30)°C
  • arrow-right The full strength of bond is obtained after approx. 24 h.

Downloadable materials
No materials for the selected product
Technical data
SKU DKMCBD280
Ean 5903649057082
Grammage 280ml
Color cream colour
Applicability Interior
Efficiency 1.5-3m²/L
Initial hardening/drying time of the joint/coating 1h
Joint/coating color after drying Cream
Consistency paste
Security
  • At least one of the glued surfaces must be porous and absorbent.
  • Does not glue plastics: PP, PE, PTFE.
  • Before use, check the material's resistance to glue.
  • Keep out of reach of children.
  • During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
  • Store and transport in tightly closed, original packaging at a temperature of (5÷30)°C
  • Frozen glue loses its properties permanently.

Related articles