Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej montażowy akrylowy fix strong bezbarwny 40ml Dragon
Klej montażowy akrylowy fix strong bezbarwny 40ml Dragon
Professional mounting adhesive intended for all finishing and assembly works.
It has a very wide range of applications and a very high strength of connecting elements made of various materials.
Replaces bolts, nails, dowels and screws.
It does not run off vertical surfaces, it is easy to apply and spread.
It creates a colourless weld after drying.
Product available in stores
Klej montażowy akrylowy fix strong bezbarwny 40ml Dragon
Professional mounting adhesive intended for all finishing and assembly works.
It has a very wide range of applications and a very high strength of connecting elements made of various materials.
Replaces bolts, nails, dowels and screws.
It does not run off vertical surfaces, it is easy to apply and spread.
It creates a colourless weld after drying.
APPLICATION:
Can be used for gluing to all typical substrates used in construction.
Perfect for gluing elements made of wood, metal, ceramics, glass, plywood, wood-like materials, PVC, polystyrene, polyurethane and others.
It can be used for gluing decorative elements, i.e. decorative ceiling and skirting boards, radiator screens, decorative tiles, plafonds, floor and wall coverings, floor and wall panels, laminates, etc., as well as for gluing mineral wool and glass wool insulation.
It does not stick to plastic: PP, PE, PTFE.
The product is intended for use both indoors and outdoors in places not exposed to direct contact with water.
Find out how to take advantage
- 1 Remove the remains of old paintwork and smoothen the surface.
- 2 Clean the glued surfaces thoroughly from dust, grease, grease, rust and other contaminants that may reduce adhesion.
- 3 Apply the glue in spots or parallel vertical strips on one of the surfaces to be glued, then press firmly.
- 4 You can position the glued elements without tearing them off for about 10 minutes from the moment of applying the glue.
- 5 Seal container tightly after completion of work.
- Carry out work at temperature (10÷30)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Before applying, check the action of the adhesive on the glued elements.
- At least one of the glued surfaces must be porous and absorbent.
- The full strength of bond is obtained after approx. 24 h.
- Clean dirty tools and remove fresh stains with warm water.
- Remove dried dirt with an appropriate implement.
Technical data
| SKU | DKMF040/BL |
|---|---|
| Ean | 5903649059611 |
| Grammage | 40ml |
| Color | Transparent |
| Type of bond | Elastic |
| Full bond strength | 24h |
| Applicability | interior or exterior |
| Efficiency | 1.5-3m²/L |
| Joint/coating color after drying | Transparent |
| Typ produktu | water-based |
| Consistency | paste |
Security
- The product is not intended for use on surfaces in direct contact with food.
- Keep out of reach of children.
- Before use, read the technical data sheet/label/safety data sheet.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Frozen glue loses its properties permanently.