Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej epoksydowy uniwersalny 5 min. Dragon
Klej epoksydowy uniwersalny 5 min. Dragon
Easy to use, very strong, two-component adhesive for bonding and filling.
The obtained joint is strong, does not deform, does not shrink and does not stretch.
After hardening, it can be sanded, sawed and drilled.
Product available in stores
Klej epoksydowy uniwersalny 5 min. Dragon
Easy to use, very strong, two-component adhesive for bonding and filling.
The obtained joint is strong, does not deform, does not shrink and does not stretch.
After hardening, it can be sanded, sawed and drilled.
APPLICATION:
Designed for gluing:
metal ,
ceramics ,
wood ,
porcelain ,
rock minerals ,
concrete elements ,
rubber ,
synthetic materials (e.g. laminates, polyester plastics, bakelite) .
Useful when repairing taps and sanitary devices and fittings, jewellery and ornament repair, fitting handles to windows, pasting up adverts, signs, panels etc.
Advantages and benefits
Dostępne kolory
Find out how to take advantage
- 1 Remove the syringe from the package, press and pull the protective cap to open the adhesive.
- 2 Depress the plunger and expel equal amounts of resin and hardener from the syringe onto a clean, disposable surface for thorough mixing.
- 3 Mix the components together thoroughly until a uniform mass is achieved.
- 4 Apply a thin layer of glue on both surfaces to be bonded.
- 5 Glued joint elements and press firmly and evenly.
- 1 Remove the syringe from the package, press and pull the protective cap to open the adhesive.
- 2 Depress the plunger and expel equal amounts of resin and hardener from the syringe onto a clean, disposable surface for thorough mixing.
- 3 Mix the components together thoroughly until a uniform mass is achieved.
- 4 Apply a thin layer of glue on both surfaces to be bonded.
- 5 Glued joint elements and press firmly and evenly.
No usage data available for this product.
- READ BEFORE USE
- The surface to be repaired must be clean, dry and degreased.
- Before applying, check the action of the adhesive on the glued elements.
- The wood to be glued should be dry, with a moisture content from (8÷12)%.
- Use at a temperature above +5°C.
- At a temperature of 20°C the glue binds within 5 min.
- The full strength of bond is obtained after approx. 12 h.
- Clean dirty tools and fresh stains with acetone.
- Remove dried dirt with an appropriate implement.
- To close the package tightly, clean the tip and replace the protective cap firmly.
- Polishing, grinding and other further work should be carried out after the adhesive has completely hardened.
- READ BEFORE USE
- The surface to be repaired must be clean, dry and degreased.
- Before applying, check the action of the adhesive on the glued elements.
- The wood to be glued should be dry, with a moisture content from (8÷12)%.
- Use at a temperature above +5°C.
- At a temperature of 20°C the glue binds within 5 min.
- The full strength of bond is obtained after approx. 12 h.
- Clean dirty tools and fresh stains with acetone.
- Remove dried dirt with an appropriate implement.
- To close the package tightly, clean the tip and replace the protective cap firmly.
- Polishing, grinding and other further work should be carried out after the adhesive has completely hardened.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Type of bond | semi-hard |
| Full bond strength | 12h |
| Initial hardening/drying time of the joint/coating | 5min |
| Typ produktu | epoxy resin+hardener |
Security
- Not suitable for bonding flexible or soft materials as well as PP, PE and PTFE.
- Proceed in accordance with the method of use and notes on the packaging.
- The product is not intended for use on surfaces in direct contact with food.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
- The adhesive is not a construction adhesive, it is not intended to carry significant stresses.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Protect against sunlight.