1 Apply the adhesive to the substrate using a trowel with a tooth spacing 4 mm.

2 Lay the carpet within 15 minutes of applying the glue.

3 Press the carpet to remove any bumps or folds. As far as possible do not move the carpet relative to the ground.

4 After completing the work, close tightly the packaging with glue.

5 The full strength of bond is obtained after approx. 48 h.

6 Clean dirty tools and fresh stains with warm water.

7 Dried glue can only be removed physically with a suitable implement.

1 Apply the adhesive to the substrate using a trowel with a tooth spacing 4 mm.

2 Lay the carpet within 15 minutes of applying the glue.

3 Press the carpet to remove any bumps or folds. As far as possible do not move the carpet relative to the ground.

4 After completing the work, close tightly the packaging with glue.

5 The full strength of bond is obtained after approx. 48 h.

6 Clean dirty tools and fresh stains with warm water.

7 Dried glue can only be removed physically with a suitable implement.

1 Apply the adhesive to the substrate using a trowel with a tooth spacing 4 mm.

2 Lay the carpet within 15 minutes of applying the glue.

3 Press the carpet to remove any bumps or folds. As far as possible do not move the carpet relative to the ground.

4 After completing the work, close tightly the packaging with glue.

5 The full strength of bond is obtained after approx. 48 h.

6 Clean dirty tools and fresh stains with warm water.

7 Dried glue can only be removed physically with a suitable implement.

1 Apply the adhesive to the substrate using a trowel with a tooth spacing 4 mm.

2 Lay the carpet within 15 minutes of applying the glue.

3 Press the carpet to remove any bumps or folds. As far as possible do not move the carpet relative to the ground.

4 After completing the work, close tightly the packaging with glue.

5 The full strength of bond is obtained after approx. 48 h.

6 Clean dirty tools and fresh stains with warm water.

7 Dried glue can only be removed physically with a suitable implement.

The substrate should be dry (recommended humidity for cement substrates 3%), strong (if necessary, the substrate should be primed with "Deep Penetrating Primer" DRAGON), clean and even.

Use at a temperature above 5°C.

Mix the glue thoroughly before use.

Do not apply glue to the carpet.

The substrate should be dry (recommended humidity for cement substrates 3%), strong (if necessary, the substrate should be primed with "Deep Penetrating Primer" DRAGON), clean and even.

Use at a temperature above 5°C.

Mix the glue thoroughly before use.

Do not apply glue to the carpet.

The substrate should be dry (recommended humidity for cement substrates 3%), strong (if necessary, the substrate should be primed with "Deep Penetrating Primer" DRAGON), clean and even.

Use at a temperature above 5°C.

Mix the glue thoroughly before use.

Do not apply glue to the carpet.

The substrate should be dry (recommended humidity for cement substrates 3%), strong (if necessary, the substrate should be primed with "Deep Penetrating Primer" DRAGON), clean and even.

Use at a temperature above 5°C.

Mix the glue thoroughly before use.

Do not apply glue to the carpet.