Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej do parkietu syntetyczny Dragon
Klej do parkietu syntetyczny Dragon
Rapidly binding
Flexible
Professional, aromatic solvent-free, waterless and fast-setting wood flooring adhesive, wood flooring mix and three-layer floor boards.
It is a perfect solution for all types of wood flooring, mosaic flooring and three-layer floor boards.
It forms a flexible joint.
Does not cause discoloration of wood.
It is characterized by good stability and high abrasive wear resistance.
It does not cause "swelling" of glued wood.
Product available in stores
Klej do parkietu syntetyczny Dragon
Professional, aromatic solvent-free, waterless and fast-setting wood flooring adhesive, wood flooring mix and three-layer floor boards.
It is a perfect solution for all types of wood flooring, mosaic flooring and three-layer floor boards.
It forms a flexible joint.
Does not cause discoloration of wood.
It is characterized by good stability and high abrasive wear resistance.
It does not cause "swelling" of glued wood.
Rapidly binding
Flexible
APPLICATION:
Designed for gluing parquet, mix parquet, parquet mosaic, industrial parquet made of traditional and exotic wood, and a three-layer board up to 2.2 m long.
It works well for bonding floors that are sensitive to moisture absorption, i.e. beech, birch, hornbeam, ash, etc.
Also useful for gluing wooden decorative elements to all types of surfaces used in construction with good durability, i.e. cement, cement-lime, self-leveling masses with a minimum thickness of 2 mm, anhydrite screeds, chipboards and chaff boards, etc.
Maximum dimensions :
Traditional wood - Length 1400 mm, Width 150 mm ;
Exotic Wood - Length 1200 mm, Width 150 mm ;
Three-layer board - Length 2200 mm, Width 210 mm .
Dostępne kolory
Find out how to take advantage
- 1 Adhesive should be applied evenly with a notched trowel.
- 2 It is recommended that the trowel spacing be 4-6 mm.
- 3 Place the wood flooring on the adhesive layer, slide it slightly and press it firmly into selected place.
- 4 Use wedges to secure gap between the wall and the installed flooring.
- 5 The gap width should be approx. 10-15 mm.
- 6 Remove wedges after min. 24 hours.
- 7 Apply pressure with heavy objects while the flooring is drying.
- 8 Clean the tools and the resulting stains with special-purpose "Thinner for wood flooring adhesive" from DRAGON. Dried adhesive can only be removed mechanically.
- 9 Dried glue can only be removed physically with a suitable implement.
- 10 After completing the work, close tightly the packaging with glue.
- 1 Adhesive should be applied evenly with a notched trowel.
- 2 It is recommended that the trowel spacing be 4-6 mm.
- 3 Place the wood flooring on the adhesive layer, slide it slightly and press it firmly into selected place.
- 4 Use wedges to secure gap between the wall and the installed flooring.
- 5 The gap width should be approx. 10-15 mm.
- 6 Remove wedges after min. 24 hours.
- 7 Apply pressure with heavy objects while the flooring is drying.
- 8 Clean the tools and the resulting stains with special-purpose "Thinner for wood flooring adhesive" from DRAGON. Dried adhesive can only be removed mechanically.
- 9 Dried glue can only be removed physically with a suitable implement.
- 10 After completing the work, close tightly the packaging with glue.
- 1 Adhesive should be applied evenly with a notched trowel.
- 2 It is recommended that the trowel spacing be 4-6 mm.
- 3 Place the wood flooring on the adhesive layer, slide it slightly and press it firmly into selected place.
- 4 Use wedges to secure gap between the wall and the installed flooring.
- 5 The gap width should be approx. 10-15 mm.
- 6 Remove wedges after min. 24 hours.
- 7 Apply pressure with heavy objects while the flooring is drying.
- 8 Clean the tools and the resulting stains with special-purpose "Thinner for wood flooring adhesive" from DRAGON. Dried adhesive can only be removed mechanically.
- 9 Dried glue can only be removed physically with a suitable implement.
- 10 After completing the work, close tightly the packaging with glue.
- 1 Adhesive should be applied evenly with a notched trowel.
- 2 It is recommended that the trowel spacing be 4-6 mm.
- 3 Place the wood flooring on the adhesive layer, slide it slightly and press it firmly into selected place.
- 4 Use wedges to secure gap between the wall and the installed flooring.
- 5 The gap width should be approx. 10-15 mm.
- 6 Remove wedges after min. 24 hours.
- 7 Apply pressure with heavy objects while the flooring is drying.
- 8 Clean the tools and the resulting stains with special-purpose "Thinner for wood flooring adhesive" from DRAGON. Dried adhesive can only be removed mechanically.
- 9 Dried glue can only be removed physically with a suitable implement.
- 10 After completing the work, close tightly the packaging with glue.
No usage data available for this product.
- READ BEFORE USE
- The subfloor should be sound, even, dust- and grease-free as well as dry with moisture content not exceeding 2% (CM).
- Thoroughly brush, grind or tear off with a milling machine that reduces adhesion or moving parts of the surface.
- Recommended wood moisture content should be 10 ± 2%.
- Wood flooring and three-layer wood boards should be seasoned according to the manufacturer's recommendations and instructions.
- Air temperature in the room should be between (18÷25)°C.
- Before laying the floor it is recommended to prime the substrate with a special-purpose "Primer for deep-penetrating parquet adhesive" by DRAGON.
- The wood to be glued should be dry, with a moisture content from (8÷12)%.
- Bring the adhesive to room temperature and mix thoroughly before its use.
- The full strength of bond is obtained after approx. 48 h.
- Wood flooring can be sanded and varnished after the time indicated by the manufacturer.
- Do not use for bonding if floor heating is installed in the room
- READ BEFORE USE
- The subfloor should be sound, even, dust- and grease-free as well as dry with moisture content not exceeding 2% (CM).
- Thoroughly brush, grind or tear off with a milling machine that reduces adhesion or moving parts of the surface.
- Recommended wood moisture content should be 10 ± 2%.
- Wood flooring and three-layer wood boards should be seasoned according to the manufacturer's recommendations and instructions.
- Air temperature in the room should be between (18÷25)°C.
- Before laying the floor it is recommended to prime the substrate with a special-purpose "Primer for deep-penetrating parquet adhesive" by DRAGON.
- The wood to be glued should be dry, with a moisture content from (8÷12)%.
- Bring the adhesive to room temperature and mix thoroughly before its use.
- The full strength of bond is obtained after approx. 48 h.
- Wood flooring can be sanded and varnished after the time indicated by the manufacturer.
- Do not use for bonding if floor heating is installed in the room
- READ BEFORE USE
- The subfloor should be sound, even, dust- and grease-free as well as dry with moisture content not exceeding 2% (CM).
- Thoroughly brush, grind or tear off with a milling machine that reduces adhesion or moving parts of the surface.
- Recommended wood moisture content should be 10 ± 2%.
- Wood flooring and three-layer wood boards should be seasoned according to the manufacturer's recommendations and instructions.
- Air temperature in the room should be between (18÷25)°C.
- Before laying the floor it is recommended to prime the substrate with a special-purpose "Primer for deep-penetrating parquet adhesive" by DRAGON.
- The wood to be glued should be dry, with a moisture content from (8÷12)%.
- Bring the adhesive to room temperature and mix thoroughly before its use.
- The full strength of bond is obtained after approx. 48 h.
- Wood flooring can be sanded and varnished after the time indicated by the manufacturer.
- Do not use for bonding if floor heating is installed in the room
- READ BEFORE USE
- The subfloor should be sound, even, dust- and grease-free as well as dry with moisture content not exceeding 2% (CM).
- Thoroughly brush, grind or tear off with a milling machine that reduces adhesion or moving parts of the surface.
- Recommended wood moisture content should be 10 ± 2%.
- Wood flooring and three-layer wood boards should be seasoned according to the manufacturer's recommendations and instructions.
- Air temperature in the room should be between (18÷25)°C.
- Before laying the floor it is recommended to prime the substrate with a special-purpose "Primer for deep-penetrating parquet adhesive" by DRAGON.
- The wood to be glued should be dry, with a moisture content from (8÷12)%.
- Bring the adhesive to room temperature and mix thoroughly before its use.
- The full strength of bond is obtained after approx. 48 h.
- Wood flooring can be sanded and varnished after the time indicated by the manufacturer.
- Do not use for bonding if floor heating is installed in the room
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Type of bond | Elastic |
| Full bond strength | 48h |
| Applicability | Interior |
| Efficiency | 0.5-0.8m²/kg |
| Initial hardening/drying time of the joint/coating | 45min |
| Joint/coating color after drying | Beige |
| Typ produktu | based on poly(vinyl acetate) |
| Consistency | paste |
Security
- Before use, check the effect of the glue on glued elements.
- Keep out of reach of children.
- Do not use acrylic primer to strengthen the surface before gluing.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
- Do not use glue for bonding exotic parquet, which is varnished and / or impregnated on the side that will be glued to the substrate.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.