1 Clean and degrease surfaces with DRAGON Denatured Alcohol or Acetone, dry and fit.

2 Apply a thin layer of glue to one of the surfaces.

3 Clean the glued elements or surfaces carefully, then degrease with denatured alcohol or acetone, dry, smooth and fit to each other.

4 Holding the tube vertically with the thread on top, pierce the membrane gently with the cap and screw the dispenser on.

5 Apply a thin layer of glue on one of the surfaces to be joined, then press the elements firmly together.

6 Binding occurs after 10 s.

7 After completing the work, close tightly the packaging with glue.

1 Clean and degrease surfaces with DRAGON Denatured Alcohol or Acetone, dry and fit.

2 Apply a thin layer of glue to one of the surfaces.

3 Thoroughly clean the surfaces to be bonded, then degrease with denatured alcohol or acetone, dry, smooth and fit together

4 Spread a drop of glue on one of the surfaces to be joined i immediately apply pressure for approximately 10 s.

5 Seal the adhesive package tightly when finished.

1 Clean and degrease surfaces with DRAGON Denatured Alcohol or Acetone, dry and fit.

2 Apply a thin layer of glue to one of the surfaces.

3 Clean the glued elements or surfaces carefully, then degrease with denatured alcohol or acetone, dry, smooth and fit to each other.

4 Holding the tube vertically with the thread on top, pierce the membrane gently with the cap and screw the dispenser on.

5 Apply a thin layer of glue on one of the surfaces to be joined, then press the elements firmly together.

6 Binding occurs after 10 s.

7 After completing the work, close tightly the packaging with glue.

READ BEFORE USE

Before applying, check the action of the adhesive on the glued elements.

Carry out work at temperature (10÷25)°C.

The temperature range of works concerns the temperature of air, substrate and glued elements.

Clean contaminated tools and fresh stains with denatured alcohol.

Remove dried dirt with an appropriate implement.

READ BEFORE USE

Before applying, check the action of the adhesive on the glued elements.

Carry out work at temperature (10÷25)°C.

The temperature range of works concerns the temperature of air, substrate and glued elements.

Clean contaminated tools and fresh stains with denatured alcohol.

Remove dried dirt with an appropriate implement.

READ BEFORE USE

Before applying, check the action of the adhesive on the glued elements.

Carry out work at temperature (10÷25)°C.

The temperature range of works concerns the temperature of air, substrate and glued elements.

Clean contaminated tools and fresh stains with denatured alcohol.

Remove dried dirt with an appropriate implement.