Loading...

Izofolia zewnętrzna Dragon

Professional liquid film for outdoor applications that forms an insulating and sealing film providing excellent protection against moisture and water. Characterised by good adhesion to typical substrates in construction. When dry, it forms, flexible, impermeable, blue film. Colour of the product allows thickness and uniformity of applied layer to be easily assessed. It is resistant to chlorinated water.
check
Perfectly sealing
check
It bridges cracks and fissures in substrate
check
Ideal for professional use
check
Exterior
APPLICATION: It is intended for use as a first waterproofing layer for flexible, waterproof protection of concrete and cement surfaces under tile, natural stone and other outdoor cladding. It can be applied to vertical and horizontal surfaces. Balconies Terraces Swimming pools

Find out how to take advantage

    SUBSTRATE PREPARATION:
  • 1 Prepare the substrate - fill cavities and cracks, level with DRAGON's "Elastic Repair Filler".
    • Application:
  • 1 Mix the package contents.
  • 2 Apply a coat with a brush or roller.
  • 3 It is advisable to apply 2-3 layers.
  • 4 Apply another layer after a minimum of 2-3 h.
  • 5 If prolonged contact with water can occur (outdoor terrace, balcony, swimming pool), apply a third coat after approx. 24 h.
    • SUBSTRATE PREPARATION:
  • 1 Prepare the substrate - fill cavities and cracks, level with DRAGON's "Elastic Repair Filler".
    • Application:
  • 1 Mix the package contents.
  • 2 Apply a coat with a brush or roller.
  • 3 It is advisable to apply 2-3 layers.
  • 4 Apply another layer after a minimum of 2-3 h.
  • 5 If prolonged contact with water can occur (outdoor terrace, balcony, swimming pool), apply a third coat after approx. 24 h.
    • SUBSTRATE PREPARATION:
  • 1 Prepare the substrate - fill cavities and cracks, level with DRAGON's "Elastic Repair Filler".
    • Application:
  • 1 Mix the package contents.
  • 2 Apply a coat with a brush or roller.
  • 3 It is advisable to apply 2-3 layers.
  • 4 Apply another layer after a minimum of 2-3 h.
  • 5 If prolonged contact with water can occur (outdoor terrace, balcony, swimming pool), apply a third coat after approx. 24 h.
No usage data available for this product.
  • arrow-right READ BEFORE USE
  • arrow-right Substrate must be completely dry, absorbent, free from dirt and substances that limit adhesion (dust, grease, old paint, etc.).
  • arrow-right Carry out work at temperature 10-30°C.
  • arrow-right During drying, do not expose the coating to water.
  • arrow-right Surface is ready for further work approximately 24 h after last layer has been applied.
  • arrow-right Protect the resulting layer from mechanical damage during further work.
  • arrow-right It is recommended to use a tile adhesive mortar to glue tiles onto surface.
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
  • arrow-right READ BEFORE USE
  • arrow-right Substrate must be completely dry, absorbent, free from dirt and substances that limit adhesion (dust, grease, old paint, etc.).
  • arrow-right Carry out work at temperature 10-30°C.
  • arrow-right During drying, do not expose the coating to water.
  • arrow-right Surface is ready for further work approximately 24 h after last layer has been applied.
  • arrow-right Protect the resulting layer from mechanical damage during further work.
  • arrow-right It is recommended to use a tile adhesive mortar to glue tiles onto surface.
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
  • arrow-right READ BEFORE USE
  • arrow-right Substrate must be completely dry, absorbent, free from dirt and substances that limit adhesion (dust, grease, old paint, etc.).
  • arrow-right Carry out work at temperature 10-30°C.
  • arrow-right During drying, do not expose the coating to water.
  • arrow-right Surface is ready for further work approximately 24 h after last layer has been applied.
  • arrow-right Protect the resulting layer from mechanical damage during further work.
  • arrow-right It is recommended to use a tile adhesive mortar to glue tiles onto surface.
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
No read before use data available for this product.

Downloadable materials
No materials for the selected product
Technical data
SKU
Ean
Grammage
Applicability Exterior
Efficiency 0.85 – 2.27m²/kg
Coating total drying time 24h
Joint/coating color after drying sky blue
Typ produktu water-based on styrene-acrylic dispersion
Consistency thick liquid
CERTIFICATION Harmonized standard no. PN-EN 14891:2012., Product type: DMP (water-impermeable dispersion, resistant to chlorinated water)
Security
  • Product should not be applied to substrates made of plastic.
  • Works must be carried out in accordance with good engineering practice and in compliance with health and safety regulations.
  • Higher temperatures and lower humidity accelerate setting.
  • It is necessary to carry out the work carefully to avoid leaks.
  • Always test on a small area before applying.
  • Empty container and unused products should be taken to Collective Waste Collection Point.
Storage and transport
  • Transport and store upright in a tightly closed, original packaging at temp. (5÷30) °C.
  • Keep out of the cold.
  • Protect against excessive heat and cold.
lzo_
Lets take care of the environment
VOC: Category A; subcategory h: Binding primers; WB type, the maximum permitted VOCs are 30 g/L, the maximum VOC in the product is 1 g/L.
lzo_

Related articles