Loading...

Liquid foil interior Dragon

Professional liquid film for interior use forming an insulating and sealing coat providing excellent protection against moisture and water. Characterised by very good adhesion to typical substrates used in construction. After drying, it creates a flexible, impermeable coating. It retains its insulating properties even in the event of micro-cracks in substrate. Colour of the product allows thickness and uniformity of applied layer to be easily assessed.
check
Perfectly sealing
check
Suitable for interiors with underfloor heating
check
Ideal for professional use
check
Interior
APPLICATION: Designed to be used as the first waterproofing layer for flexible, watertight protection of concrete and cement surfaces under the ceramic tile cladding, internal. It can be applied to vertical and horizontal surfaces. Laundries Bathrooms Kitchens Cellars Garages

Find out how to take advantage

    SUBSTRATE PREPARATION:
  • 1 Prepare the substrate - fill cavities and cracks, level with DRAGON's "Elastic Repair Filler".
    • Application:
  • 1 Mix the package contents.
  • 2 Apply a coat with a brush or roller.
  • 3 It is advisable to apply 2 layers.
  • 4 Apply another layer after a minimum of 2-3 h
    • SUBSTRATE PREPARATION:
  • 1 Prepare the substrate - fill cavities and cracks, level with DRAGON's "Elastic Repair Filler".
    • Application:
  • 1 Mix the package contents.
  • 2 Apply a coat with a brush or roller.
  • 3 It is advisable to apply 2 layers.
  • 4 Apply another layer after a minimum of 2-3 h
    • SUBSTRATE PREPARATION:
  • 1 Prepare the substrate - fill cavities and cracks, level with DRAGON's "Elastic Repair Filler".
    • Application:
  • 1 Mix the package contents.
  • 2 Apply a coat with a brush or roller.
  • 3 It is advisable to apply 2 layers.
  • 4 Apply another layer after a minimum of 2-3 h
No usage data available for this product.
  • arrow-right Substrate must be completely dry, absorbent, free from dirt and substances that limit adhesion (dust, grease, old paint, etc.).
  • arrow-right Carry out work at temperature 10-30°C.
  • arrow-right During drying, do not expose the coating to water.
  • arrow-right Surface is ready for further work approximately 24 h after last layer has been applied.
  • arrow-right Protect the resulting layer from mechanical damage during further work.
  • arrow-right It is recommended to use a tile adhesive mortar to glue tiles onto surface.
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
  • arrow-right Substrate must be completely dry, absorbent, free from dirt and substances that limit adhesion (dust, grease, old paint, etc.).
  • arrow-right Carry out work at temperature 10-30°C.
  • arrow-right During drying, do not expose the coating to water.
  • arrow-right Surface is ready for further work approximately 24 h after last layer has been applied.
  • arrow-right Protect the resulting layer from mechanical damage during further work.
  • arrow-right It is recommended to use a tile adhesive mortar to glue tiles onto surface.
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
  • arrow-right Substrate must be completely dry, absorbent, free from dirt and substances that limit adhesion (dust, grease, old paint, etc.).
  • arrow-right Carry out work at temperature 10-30°C.
  • arrow-right During drying, do not expose the coating to water.
  • arrow-right Surface is ready for further work approximately 24 h after last layer has been applied.
  • arrow-right Protect the resulting layer from mechanical damage during further work.
  • arrow-right It is recommended to use a tile adhesive mortar to glue tiles onto surface.
  • arrow-right Clean dirty tools and remove fresh stains with warm water.
No read before use data available for this product.

Downloadable materials
No materials for the selected product
Technical data
SKU
Ean
Grammage
Applicability Interior
Efficiency 0.85 – 2.27m²/kg
Coating total drying time 24h
Initial hardening/drying time of the joint/coating 18-22min
Joint/coating color after drying sky blue
Typ produktu based on polymer resins and inorganic fillers
Consistency high viscosity mass
Security
  • Product should not be applied to substrates made of plastic.
  • Keep out of reach of children.
  • Works must be carried out in accordance with good engineering practice and in compliance with health and safety regulations.
  • Higher temperatures and lower humidity accelerate setting.
  • It is necessary to carry out the work carefully to avoid leaks.
  • Always test on a small area before applying.
  • Empty container and unused products should be taken to Collective Waste Collection Point.
Storage and transport
  • Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
  • Keep out of the cold.
  • Protect against excessive heat and cold.
lzo_
Lets take care of the environment
VOC: Category A; subcategory h: Binding primers; WB type, the maximum permitted VOCs are 30 g/L, the maximum VOC in the product is 1 g/L.
lzo_

Related articles