Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroGrunt uniwersalny akrylowy Dragon
Grunt uniwersalny akrylowy Dragon
Effectively reduces the absorbency of the substrate and unifies the parameters of the entire primed surface.
Strengthens the substrate, increases the adhesion of subsequent applied layers, and reduces paint consumption.
After drying, it forms a durable and transparent coating that is water vapor permeable.
Product available in stores
Grunt uniwersalny akrylowy Dragon
Effectively reduces the absorbency of the substrate and unifies the parameters of the entire primed surface.
Strengthens the substrate, increases the adhesion of subsequent applied layers, and reduces paint consumption.
After drying, it forms a durable and transparent coating that is water vapor permeable.
APPLICATION:
The product is intended for priming porous and absorbent substrates, i.e. concrete, plasterboard, cement board, floors, plasters (also dispersion ones).
The primer can be used under paints, adhesives, self-leveling compounds, putties, ceramic tiles, dispersion plasters, wallpapers.
It can also be used to ensure proper adhesion of surface preparations, protecting the substrate against environmental factors.
Intended for both indoor and outdoor use.
Advantages and benefits
Dostępne kolory
Find out how to take advantage
- 1 Remove old, poorly bonded coatings and paint fragments.
- 2 Repair any surface damage.
- 3 Degrease surfaces, for example with painter's soap.
- 4 Dust the surfaces.
- 5 Cover the floor with painter's foil and protect all areas that shouldn't be painted, such as electrical sockets, skirting boards, woodwork, etc.
- 1 Mix the contents of the package thoroughly.
- 2 Start by painting in the corners.
- 3 Apply an even coat with a brush or roller.
- 4 Further painting work on the primed surface can be carried out as early as 2 h after priming.
- 1 Remove old, poorly bonded coatings and paint fragments.
- 2 Repair any surface damage.
- 3 Degrease surfaces, for example with painter's soap.
- 4 Dust the surfaces.
- 5 Cover the floor with painter's foil and protect all areas that shouldn't be painted, such as electrical sockets, skirting boards, woodwork, etc.
- 1 Mix the contents of the package thoroughly.
- 2 Start by painting in the corners.
- 3 Apply an even coat with a brush or roller.
- 4 Further painting work on the primed surface can be carried out as early as 2 h after priming.
- 1 Remove old, poorly bonded coatings and paint fragments.
- 2 Repair any surface damage.
- 3 Degrease surfaces, for example with painter's soap.
- 4 Dust the surfaces.
- 5 Cover the floor with painter's foil and protect all areas that shouldn't be painted, such as electrical sockets, skirting boards, woodwork, etc.
- 1 Mix the contents of the package thoroughly.
- 2 Start by painting in the corners.
- 3 Apply an even coat with a brush or roller.
- 4 Further painting work on the primed surface can be carried out as early as 2 h after priming.
SUBSTRATE PREPARATION:
Priming:
SUBSTRATE PREPARATION:
Priming:
SUBSTRATE PREPARATION:
Priming:
No usage data available for this product.
- READ BEFORE USE
- The substrate prepared for priming should be degreased, dry and free from contamination (dust, old paints, fungi, mold, etc.).
- Mineral plaster should be seasoned at least 6 weeks before priming.
- Carry out work at temperature (10÷30)°C.
- The primed surface is ready for further work after approx. 2 hours of drying at temperature + 20°C.
- Tools should be cleaned with water, immediately after use.
- READ BEFORE USE
- The substrate prepared for priming should be degreased, dry and free from contamination (dust, old paints, fungi, mold, etc.).
- Mineral plaster should be seasoned at least 6 weeks before priming.
- Carry out work at temperature (10÷30)°C.
- The primed surface is ready for further work after approx. 2 hours of drying at temperature + 20°C.
- Tools should be cleaned with water, immediately after use.
- READ BEFORE USE
- The substrate prepared for priming should be degreased, dry and free from contamination (dust, old paints, fungi, mold, etc.).
- Mineral plaster should be seasoned at least 6 weeks before priming.
- Carry out work at temperature (10÷30)°C.
- The primed surface is ready for further work after approx. 2 hours of drying at temperature + 20°C.
- Tools should be cleaned with water, immediately after use.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Applicability | interior or exterior |
| Efficiency | 10-20m²/L. |
| Joint/coating color after drying | Transparent |
| Typ produktu | water-based on acrylic dispersion |
Security
- Keep out of reach of children.
- If swallowed, immediately seek medical advice – show the packaging or label.
- Protect freshly primed surfaces from rain.
Storage and transport
- Transport and store upright in a tightly closed, original packaging at temp. (5÷30) °C.
- Protect from overheating.
Lets take care of the environment
VOC:
VOC: Category A, subcategory h: Primers with binding properties, type FW; the maximum allowable VOC is 30 g/L, the maximum VOC in the product is <5 g/L.
