Loading...

Grunt szczepny beton kontakt Dragon

Ready-to-use, vapor-permeable primer for the preparation of the bonding layer on substrates with low water absorption. Thanks to the content of polymer and quartz sand, it provides excellent adhesion of the top layer to the substrate. The brick-red product allows you to control even application with a brush or roller.
check
Ready to use
check
Ideal for substrates with low water absorption
check
High-quality formula with quartz grains
check
For indoor and outdoor use
APPLICATION: The product is intended for the preparation of a rough bonding layer on non-absorbent substrates, for applying putty, machine plaster, fixing ceramic tiles, etc. For use on: concrete and traditional substrates, wall substrates intended for plastering (bricks, cement blocks), walls with polystyrene insulation, prefabricated elements and sanded OSB boards, on ceramic tiles and other difficult substrates.
Advantages and benefits
check
Ready to use
check
Ideal for substrates with low water absorption
check
High-quality formula with quartz grains
check
The brick-red dye defines the stage of work

Find out how to take advantage

    SUBSTRATE PREPARATION:
  • 1 Repair any surface damage.
  • 2 Degrease the surface, e.g. with paint soap.
  • 3 Dust off the surface.
    • Priming:
  • 1 Cover the floor with painting foil.
  • 2 Protect all places that should not be painted, such as sockets, baseboards, woodwork, etc.
  • 3 Mix the package contents.
  • 4 Apply the product evenly over the entire surface with a block paintbrush or roller.
  • 5 Carry out further work after complete drying.
    • SUBSTRATE PREPARATION:
  • 1 Repair any surface damage.
  • 2 Degrease the surface, e.g. with paint soap.
  • 3 Dust off the surface.
    • Priming:
  • 1 Cover the floor with painting foil.
  • 2 Protect all places that should not be painted, such as sockets, baseboards, woodwork, etc.
  • 3 Mix the package contents.
  • 4 Apply the product evenly over the entire surface with a block paintbrush or roller.
  • 5 Carry out further work after complete drying.
No usage data available for this product.
  • arrow-right READ BEFORE USE
  • arrow-right Apply an undiluted thin and even layer on the substrate at a temperature of (10÷30)°C.
  • arrow-right READ BEFORE USE
  • arrow-right Apply an undiluted thin and even layer on the substrate at a temperature of (10÷30)°C.
No read before use data available for this product.

Downloadable materials
No materials for the selected product
Technical data
SKU
Ean
Grammage
Color red oxide colour
Coating total drying time 24h
Initial hardening/drying time of the joint/coating 1h
Consistency liquid
Security
  • Familiarize yourself with the product's application.
  • Keep out of reach of children.
  • If swallowed, contact a doctor immediately.
  • If medical advice is needed, have product container or label at hand.
Storage and transport
  • Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
lzo_
Lets take care of the environment
VOC: Category A Primer paints with binding properties, WB type, the maximum permitted VOCs are 30 g/L, the maximum VOC in the product is 1 g/L.
lzo_

Related articles