Loading...

Grunt głęboko penetrujący DG10 Dragon

It effectively reduces the absorbency of the substrate and unifies the parameters of the entire primed surface. After drying, it forms a transparent, flexible, water-vapor permeable coating. Does not contain organic solvents (<1.0 g/L). Reduces paint consumption.
Quick drying Quick drying
check
Penetrates deep into the surface
check
Increases adhesion to the substrate
check
For indoor and outdoor use
APPLICATION: The product is intended for priming porous and absorbent substrates, i.e. concrete, plasterboard, cement board, floors, plasters (also dispersion ones). ⚠️ It can also be used to ensure proper adhesion of surface preparations, protecting the substrate against environmental factors. Intended for both indoor and outdoor use.

Find out how to take advantage

    SUBSTRATE PREPARATION:
  • 1 Remove old, poorly bonded coatings and paint fragments.
  • 2 Repair any surface damage.
  • 3 Degrease surfaces, for example with painter's soap.
  • 4 Dust the surfaces.
  • 5 Cover the floor with painter's foil and protect all areas that shouldn't be painted, such as electrical sockets, skirting boards, woodwork, etc.
    • Priming:
  • 1 Mix the contents of the package thoroughly.
  • 2 Start by painting in the corners.
  • 3 Apply an even coat with a brush or roller.
  • 4 Tightly close the package after finishing work.
    • SUBSTRATE PREPARATION:
  • 1 Remove old, poorly bonded coatings and paint fragments.
  • 2 Repair any surface damage.
  • 3 Degrease surfaces, for example with painter's soap.
  • 4 Dust the surfaces.
  • 5 Cover the floor with painter's foil and protect all areas that shouldn't be painted, such as electrical sockets, skirting boards, woodwork, etc.
    • Priming:
  • 1 Mix the contents of the package thoroughly.
  • 2 Start by painting in the corners.
  • 3 Apply an even coat with a brush or roller.
  • 4 Tightly close the package after finishing work.
    • SUBSTRATE PREPARATION:
  • 1 Remove old, poorly bonded coatings and paint fragments.
  • 2 Repair any surface damage.
  • 3 Degrease surfaces, for example with painter's soap.
  • 4 Dust the surfaces.
  • 5 Cover the floor with painter's foil and protect all areas that shouldn't be painted, such as electrical sockets, skirting boards, woodwork, etc.
    • Priming:
  • 1 Mix the contents of the package thoroughly.
  • 2 Start by painting in the corners.
  • 3 Apply an even coat with a brush or roller.
  • 4 Tightly close the package after finishing work.
No usage data available for this product.
  • arrow-right READ BEFORE USE
  • arrow-right The surface should be degreased, dry, and free from contaminants (dust, old paint, fungi, mold, etc.).
  • arrow-right Mineral plaster should be seasoned at least 6 weeks before priming.
  • arrow-right Carry out work at a temperature ranging from +5°C to +30°C (temperature of the substrate, ambient temperature, and the primed elements).
  • arrow-right The primed surface is ready for further work after approximately 2 hours of drying at a temperature of +20°C and humidity of 50–60%.
  • arrow-right Clean dirty tools and fresh stains with water, immediately after use.
  • arrow-right READ BEFORE USE
  • arrow-right The surface should be degreased, dry, and free from contaminants (dust, old paint, fungi, mold, etc.).
  • arrow-right Mineral plaster should be seasoned at least 6 weeks before priming.
  • arrow-right Carry out work at a temperature ranging from +5°C to +30°C (temperature of the substrate, ambient temperature, and the primed elements).
  • arrow-right The primed surface is ready for further work after approximately 2 hours of drying at a temperature of +20°C and humidity of 50–60%.
  • arrow-right Clean dirty tools and fresh stains with water, immediately after use.
  • arrow-right READ BEFORE USE
  • arrow-right The surface should be degreased, dry, and free from contaminants (dust, old paint, fungi, mold, etc.).
  • arrow-right Mineral plaster should be seasoned at least 6 weeks before priming.
  • arrow-right Carry out work at a temperature ranging from +5°C to +30°C (temperature of the substrate, ambient temperature, and the primed elements).
  • arrow-right The primed surface is ready for further work after approximately 2 hours of drying at a temperature of +20°C and humidity of 50–60%.
  • arrow-right Clean dirty tools and fresh stains with water, immediately after use.
No read before use data available for this product.

Downloadable materials
No materials for the selected product
Technical data
SKU
Ean
Grammage
Color light blue colour
Applicability interior or exterior
Efficiency 10-20m²/L
Joint/coating color after drying sky blue
Typ produktu water-based on acrylic dispersion
CERTIFICATION GIS code: D1 - Solvent-free, dispersion adhesives and pre-treatment agents.
Security
  • When applying the product by spraying, use masks with A2/P2 filter.
  • Keep out of reach of children.
  • When sanding, use a P2 filter mask.
  • During the work and after its completion, the room should be intensively ventilated until the characteristic smell disappears.
  • Do not eat, drink, or smoke when using the product.
  • In case of contact with skin or eyes, rinse with plenty of water.
  • Do not contaminate surface and groundwater.
  • Do not discharge into the sewage system.
  • Containers for recycling should be completely empty.
  • Dispose of product residues at selective waste collection points.
  • If swallowed, immediately seek medical advice – show the packaging or label.
  • The technical data sheet can be downloaded from: www.dragon.com.pl
  • Information for people with allergies can be obtained at this phone number: +48 12 625 75 00
Storage and transport
  • Transport and store in tightly closed, original packaging at temp. from +5°C to +30°C.
lzo_
Lets take care of the environment
VOC: Category A; Binding primers, type FW, the maximum permitted VOC content is 30 g/L, the maximum VOC content in the product is 20 g/L. VOC: Maximum VOC: 2%.
lzo_

Related articles