Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroGładź szpachlowa finish Dragon
Gładź szpachlowa finish Dragon
Ready-to-use, slow-setting acrylic putty.
Easy to apply and sand.
A high-quality product that gives strong and durable surfaces.
Ensures wall breathing.
Does not muddy sandpaper.
It creates an excellent base for painting.
Water-soluble.
Product available in stores
Gładź szpachlowa finish Dragon
Ready-to-use, slow-setting acrylic putty.
Easy to apply and sand.
A high-quality product that gives strong and durable surfaces.
Ensures wall breathing.
Does not muddy sandpaper.
It creates an excellent base for painting.
Water-soluble.
APPLICATION:
It is used to smooth out unevenness on concrete, cement-lime and gypsum-lime surfaces.
Perfect as a primer for emulsion, acrylic and phthalic paints.
Recommended for smooth plastering.
The product is intended for renovation, finishing and decorative works in construction.
Dostępne kolory
Find out how to take advantage
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Squeeze the right amount of mass from the tube, fill the defect, smooth it with a spatula within 5 minutes after applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Squeeze the right amount of mass from the tube, fill the defect, smooth it with a spatula within 5 minutes after applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
- 1 Clean the surface, dust it and degrease it.
- 2 In the case of highly absorbent surfaces (eg gypsum), prime the surface with DRAGON DEEP PENETRATING PRIMER.
- 1 Mix the contents of the package well.
- 2 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
- 3 Apply the next layer after the previous one is completely dry.
- 4 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
- 1 Clean the surface, dust it and degrease it.
- 1 Apply the next layer after the previous one is completely dry.
- 2 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
- 3 Mix the contents of the package well.
- 4 Apply the right amount of mass to fill the defect, and then smooth it with a spatula within 5 minutes of applying the mass, before the skin forms.
- 5 Apply the next layer after the previous one is completely dry.
- 6 After 12 hours, the putty surface can be sanded with mesh or fine sandpaper.
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
SUBSTRATE PREPARATION:
Application:
No usage data available for this product.
- READ BEFORE USE
- Carry out work at temperature (10÷25)°C.
- Air humidity should be max. 70%.
- The drying time depends on the temperature and air humidity. 4 h
- Clean dirty tools and remove fresh stains with warm water.
- In order to minimize the risk of microcracking, it is recommended to prime with DRAGON DEEP PENETRATING PRIMER after approx. 24 hours.
- The putty and primed surface can be painted with all types of paints.
- READ BEFORE USE
- Carry out work at temperature (10÷25)°C.
- Air humidity should be max. 70%.
- The drying time depends on the temperature and air humidity. 4 h
- Clean dirty tools and remove fresh stains with warm water.
- In order to minimize the risk of microcracking, it is recommended to prime with DRAGON DEEP PENETRATING PRIMER after approx. 24 hours.
- The putty and primed surface can be painted with all types of paints.
- READ BEFORE USE
- Carry out work at temperature (10÷25)°C.
- Air humidity should be max. 70%.
- The drying time depends on the temperature and air humidity. 4 h
- Clean dirty tools and remove fresh stains with warm water.
- In order to minimize the risk of microcracking, it is recommended to prime with DRAGON DEEP PENETRATING PRIMER after approx. 24 hours.
- The putty and primed surface can be painted with all types of paints.
- READ BEFORE USE
- Carry out work at temperature (10÷25)°C.
- Air humidity should be max. 70%.
- The drying time depends on the temperature and air humidity. 4 h
- Clean dirty tools and remove fresh stains with warm water.
- In order to minimize the risk of microcracking, it is recommended to prime with DRAGON DEEP PENETRATING PRIMER after approx. 24 hours.
- The putty and primed surface can be painted with all types of paints.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Applicability | Interior |
| Efficiency | 1-2m²/kg |
| Coating total drying time | 12h. |
| Initial hardening/drying time of the joint/coating | 4h. |
| Joint/coating color after drying | White |
| Typ produktu | acrylic |
Security
- Do not use in places exposed to direct contact with water.
- It is not recommended to use the product in places exposed to elevated temperatures.
- Keep out of reach of children.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Protect against excessive heat and cold.
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Unused, tightly closed in its original packaging, it remains suitable for further use.
Lets take care of the environment
VOC:
