Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroFarba żaroodporna Dragon
Farba żaroodporna Dragon
Heat-resistant paint for decorative and protective painting of metal parts exposed to continuous or periodic exposure to elevated temperatures.
The hardened coating is temperature resistant up to +600°C.
Does not turn yellow or flake under high temperatures.
Highly impact and weather resistant.
Creates an anti-corrosive coating after three coats of paint.
Product available in stores
Farba żaroodporna Dragon
Heat-resistant paint for decorative and protective painting of metal parts exposed to continuous or periodic exposure to elevated temperatures.
The hardened coating is temperature resistant up to +600°C.
Does not turn yellow or flake under high temperatures.
Highly impact and weather resistant.
Creates an anti-corrosive coating after three coats of paint.
APPLICATION:
Designed for painting metal surfaces (except copper, brass and bronze) exposed to high temperatures.
Recommended for painting stoves, fireplace inserts, heating elements and car exhaust elements (mufflers and exhaust pipes).
Dostępne kolory
Find out how to take advantage
- 1 Thoroughly remove rust from painted surfaces using a wire brush and/or DRAGON steel and cast iron rust remover, remove old paint residues, e.g. with DRAGON paint and varnish remover, dust and degrease with e.g. DRAGON Acetone.
- 2 Mix the product thoroughly before use.
- 3 Apply paint with a brush, gun or by dipping.
- 4 Leave to dry completely for about 1 hour at a temperature of 20 °C.
- 5 Tightly close the package after finishing work.
- 6 After the last layer has dried, the coating should be hardened during 1h at a temperature above +200°C in order to obtain the expected temperature resistance.
- 1 Thoroughly remove rust from painted surfaces using a wire brush and/or DRAGON steel and cast iron rust remover, remove old paint residues, e.g. with DRAGON paint and varnish remover, dust and degrease with e.g. DRAGON Acetone.
- 2 Mix the product thoroughly before use.
- 3 Apply paint with a brush, gun or by dipping.
- 4 Leave to dry completely for about 1 hour at a temperature of 20 °C.
- 5 Tightly close the package after finishing work.
- 6 After the last layer has dried, the coating should be hardened during 1h at a temperature above +200°C in order to obtain the expected temperature resistance.
No usage data available for this product.
- READ BEFORE USE
- Carry out work at temperature (5÷30)°C.
- The temperature of the substrate during painting and drying should not exceed 30°C.
- Painting 2-3 times is recommended.
- Paint must not be used if coating cannot be cured at temperatures exceeding +200°C; painted part reaches temperatures higher than room temperature (e.g. radiators).
- Clean dirty tools and remove fresh stains with xylene.
- Remove dried dirt with an appropriate implement.
- READ BEFORE USE
- Carry out work at temperature (5÷30)°C.
- The temperature of the substrate during painting and drying should not exceed 30°C.
- Painting 2-3 times is recommended.
- Paint must not be used if coating cannot be cured at temperatures exceeding +200°C; painted part reaches temperatures higher than room temperature (e.g. radiators).
- Clean dirty tools and remove fresh stains with xylene.
- Remove dried dirt with an appropriate implement.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Color | black |
| Applicability | interior or exterior |
| Efficiency | 15m²/L |
| Initial hardening/drying time of the joint/coating | 1h |
| Joint/coating color after drying | anthracite |
| Typ produktu | heat-resistant paint based on methyl silicone resin |
Security
- Do not use on copper, brass and bronze.
- Keep out of reach of children.
- Vapours are released during curing.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (0÷30) °C.
Lets take care of the environment
VOC:
Category A;
Subcategory i: High quality single-component paints,
type SB,
the maximum permitted VOCs are 500 g/L,
the maximum VOC in the product is 500 g/L.
