Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroAkryl uniwersalny Dragon
Akryl uniwersalny Dragon
Excellent adhesion
Waterproof after curing
All-purpose sealant on an acrylic dispersion basis for filling cracks and joints indoors.
It has excellent adhesion to all porous substrates used in the construction industry.
Product available in stores
Akryl uniwersalny Dragon
All-purpose sealant on an acrylic dispersion basis for filling cracks and joints indoors.
It has excellent adhesion to all porous substrates used in the construction industry.
Excellent adhesion
Waterproof after curing
APPLICATION:
Designed for:
sealing of construction joints and crevices as well as building and construction components made of concrete, wood, metal, brick, plastic and plasterboard;
grouting between masonry and skirting boards, stairs, ceiling and electrical sockets;
minor repairs before painting;
filling of cracks and fissures in walls, floors, ceilings and corners.
For interior use (excluding areas exposed to continuous moisture without the possibility of proper drying).
Substrate types: concrete, ceramic, brick, plaster, wood, stone.
WALLS - CEILINGS
Dostępne kolory
Find out how to take advantage
- 1 Cut the cartridge outlet above the thread and screw the applicator, cut at an acute angle, to the width of the weld.
- 2 Squeeze the sealant evenly from the tube by inserting it into the gaps with a slight excess, continuously leaving no gaps or voids.
- 3 Immediately after application, smooth the joint with your finger or with a tool moistened, for example, in a soap solution. You can use, for example, a spatula for this purpose.
- 4 After the work is finished, the packaging with the sealant should be tightly closed.
- 1 Mix the contents by kneading the tube for 1-2 minutes.
- 2 Sealant should be squeezed out evenly from the tube, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.
- 3 Immediately after application, smooth the joint with a tool or a finger moistened, for example, in a soap solution. You can use, for example, a spatula for this purpose.
- 4 Tightly close the package after finishing work.
No usage data available for this product.
- READ BEFORE USE
- Ensure that the surfaces to be sealed are clean, dry and degreased.
- In order to avoid contamination of the joint edges and also to achieve a straight joint line, tape the joint area with painter's tape.
- Be sure to remove the tape as soon as the work is finished, before the sealant cures.
- Carry out work at temperature (5-40)°C.
- Minimum/maximum joint width must be 5 mm/25 mm.
- In order to reduce deformation of joints, their depth must be significantly less than their width.
- Excess uncured sealer and fresh stains can be removed with a damp cloth.
- Cured sealant can be removed mechanically.
- Protect the fresh joint from contact with moisture and water until it is completely dry.
- READ BEFORE USE
- Ensure that the surfaces to be sealed are clean, dry and degreased.
- In order to avoid contamination of the joint edges and also to achieve a straight joint line, tape the joint area with painter's tape.
- Be sure to remove the tape as soon as the work is finished, before the sealant cures.
- Carry out work at temperature (5-40)°C.
- Minimum/maximum joint width must be 5 mm/25 mm.
- In order to reduce deformation of joints, their depth must be significantly less than their width.
- Excess uncured sealer and fresh stains can be removed with a damp cloth.
- Cured sealant can be removed mechanically.
- Protect the fresh joint from contact with moisture and water until it is completely dry.
No read before use data available for this product.
Technical data
| SKU | |
|---|---|
| Ean | |
| Grammage | |
| Color | White |
| Curing rate | 2mm/24 h |
| Applicability | Interior |
| Joint/coating color after drying | White |
| Consistency | paste |
| CERTIFICATION | The product has CE marking - meets the requirements of harmonized standard EN 15651-1:2012., The product meets French standards for volatile organic compound emissions in class A+. |
Security
- Do not use for sealing in areas exposed to constant water.
- Keep out of reach of children.
- The product is not suitable for expansion joints.
- Proceed in accordance with the method of use and notes on the packaging.
Storage and transport
- Protect against excessive heat and cold.
- Transport and store at temp. (5÷30)°C