Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroAkryl szybko malowalny biały 280ml Dragon
Akryl szybko malowalny biały 280ml Dragon
Waterproof after curing
A single-component, plastic-elastic sealing compound on an acrylic dispersion basis for sealing and repairing joints and cracks in walls and plaster with rapid paintability.
It can be painted with alkyd and water-based paints as early as 15 minutes after application.
Product available in stores
Akryl szybko malowalny biały 280ml Dragon
A single-component, plastic-elastic sealing compound on an acrylic dispersion basis for sealing and repairing joints and cracks in walls and plaster with rapid paintability.
It can be painted with alkyd and water-based paints as early as 15 minutes after application.
Waterproof after curing
APPLICATION:
Designed for:
Repair and sealing of cracks, cavities in walls and ceilings (plaster, plasterboard, putty);
Sealing of corners and joints made of plaster-cardboard panel, around stucco, trims, suspended ceilings, window sills, built-in wardrobes, window and door frames, etc.
Substrate types: concrete, brick, plaster-cardboard panel, plaster, wood, stone.
CORNERS – WALLS – CEILINGS
Find out how to take advantage
- 1 Cut the cartridge outlet above the thread and screw the applicator, cut at an acute angle, to the width of the weld.
- 2 Squeeze the sealant evenly from the tube by inserting it into the gaps with a slight excess, continuously leaving no gaps or voids.
- 3 Immediately after application, smooth the joint with your finger or with a tool moistened, for example, in a soap solution. You can use, for example, a spatula for this purpose.
- 4 After the work is finished, the packaging with the sealant should be tightly closed.
- Ensure that the surfaces to be sealed are clean, dry and degreased.
- In order to avoid contamination of the joint edges and also to achieve a straight joint line, tape the joint area with painter's tape.
- Be sure to remove the tape as soon as the work is finished, before the sealant cures.
- Carry out work at temperature (5÷40)°C.
- Minimum/maximum joint width must be 5 mm/25 mm.
- In order to reduce deformation of joints, their depth must be significantly less than their width.
- Excess uncured sealer and fresh stains can be removed with a damp cloth.
- Cured sealant can be removed mechanically.
- Protect the fresh joint from contact with moisture and water until it is completely dry.
Technical data
| SKU | DAKSM280 |
|---|---|
| Ean | 5903649086426 |
| Grammage | 280ml |
| Color | White |
| Curing rate | 2mm/24 h |
| Applicability | Interior |
| Joint/coating color after drying | White |
| Consistency | paste |
| CERTIFICATION | The product has an EMICODE® premium class EC1 PLUS certificate, confirming very low emissions of volatile organic compounds., The product has CE marking - meets the requirements of harmonized standard EN 15651-1:2012. |
Security
- The product is not suitable for expansion joints.
- Keep out of reach of children.
- Do not use for sealing in areas exposed to constant water.
- Proceed in accordance with the method of use and notes on the packaging.
Storage and transport
- Protect against excessive heat and cold.
- Transport and store at temp. (5÷30)°C