1 Cut off the tip and insert the dosing nozzle.

2 Apply the sealant evenly, inserting it into the joints with a slight excess, continuously leaving no gaps or voids.

3 After applying the sealant, smooth it with e.g. a spatula within 5-10 minutes.

4 Tightly close the package after finishing work.

1 Squeeze the sealant evenly from the tube by inserting it into the gaps with a slight excess, continuously leaving no gaps or voids.

2 After applying the grout, smooth it with e.g. a spatula within 5-10 minutes.

3 After the work is finished, the packaging with the sealant should be tightly closed.

The surfaces should be free of dust, grease, oil, etc.

Carry out work at temperature (10÷30)°C.

The temperature range of works concerns the temperature of air, substrate and glued elements.

Clean dirty tools and remove fresh stains with warm water.

Dried up sealant can only be removed mechanically.

When used outdoors, make sure that the filled gaps are not exposed to water within 5 hours, and then they are protected against direct rainfall.

The time of full hardening, depending on the thickness of the joint, is from 1 to 5 days.

The surfaces should be free of dust, grease, oil, etc.

Carry out work at temperature (10÷30)°C.

The temperature range of works concerns the temperature of air, substrate and glued elements.

Clean dirty tools and remove fresh stains with warm water.

Dried up sealant can only be removed mechanically.

When used outdoors, make sure that the filled gaps are not exposed to water within 5 hours, and then they are protected against direct rainfall.

The time of full hardening, depending on the thickness of the joint, is from 1 to 5 days.