Loading...

Acrylic for plaster-cardboard panels White 280ml Dragon

One-component sealant on an acrylic emulsion basis reinforced with silicone emulsion for joints in plasterboard technology (plasterboard). It has excellent grip and good flexibility.
check
Excellent adhesion
Flexible Flexible
check
It does not discolour paint coatings
Waterproof after curing Waterproof after curing
APPLICATION: Designed for: jointing plasterboard in drywall technology (including jointing corners); masking of cracks and crevices in concrete, masonry, plaster, wood, etc. grouting of coffers and decorative panels, door and baseboards, window sills, etc. For indoor and outdoor applications (excluding areas exposed to continuous moisture without the possibility of proper drying). Substrate types: concrete, brick, plaster-cardboard panel, plaster, wood, stone. CAVITIES - CRACKS - JOINTS

Find out how to take advantage

  • 1 Cut the cartridge outlet above the thread and screw the applicator, cut at an acute angle, to the width of the weld.
  • 2 Squeeze the sealant evenly from the tube by inserting it into the gaps with a slight excess, continuously leaving no gaps or voids.
  • 3 Immediately after application, smooth the joint with your finger or with a tool moistened, for example, in a soap solution. You can use, for example, a spatula for this purpose.
  • 4 After the work is finished, the packaging with the sealant should be tightly closed.
  • arrow-right Ensure that the surfaces to be sealed are clean, dry and degreased.
  • arrow-right In order to avoid contamination of the joint edges and also to achieve a straight joint line, tape the joint area with painter's tape.
  • arrow-right Be sure to remove the tape as soon as the work is finished, before the sealant cures.
  • arrow-right Carry out work at temperature (5÷40)°C.
  • arrow-right Minimum/maximum joint width must be 5 mm/25 mm.
    • The ratio of joint width to depth should preferably be 2:1.
  • 1 Excess uncured sealer and fresh stains can be removed with a damp cloth.
  • 2 Cured sealant can be removed mechanically.
  • 3 Protect the fresh joint from contact with moisture and water until it is completely dry.

Downloadable materials
No materials for the selected product
Technical data
SKU DAKPGK280
Ean 5903649086440
Grammage 280ml
Color White
Curing rate 2mm/24 h
Type of bond Elastic
Applicability interior or exterior
Joint/coating color after drying White
Consistency paste
CERTIFICATION The product has CE marking - meets the requirements of harmonized standard EN 15651-1:2012., The product meets French standards for volatile organic compound emissions in class A+.
Security
  • Do not use for sealing in areas exposed to constant water.
  • Keep out of reach of children.
  • Proceed in accordance with the method of use and notes on the packaging.
Storage and transport
  • Protect against excessive heat and cold.
  • Transport and store at temp. (5÷30) °C.