Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej uniwersalny kontaktowy w aerozolu Transparent 500ml Dragon
Klej uniwersalny kontaktowy w aerozolu Transparent 500ml Dragon
Water-resistant
All-purpose, strong contact adhesive in aerosol form.
It can be used for upholstery work and for gluing carpets.
Equipped with a valve for simple and convenient application of the adhesive.
It is characterized by high initial adhesion and low absorption.
It is ideal for applications where the application of conventional adhesives may be difficult.
Perfect for the maintenance of home, camping and modeling equipment.
Product available in stores
Klej uniwersalny kontaktowy w aerozolu Transparent 500ml Dragon
All-purpose, strong contact adhesive in aerosol form.
It can be used for upholstery work and for gluing carpets.
Equipped with a valve for simple and convenient application of the adhesive.
It is characterized by high initial adhesion and low absorption.
It is ideal for applications where the application of conventional adhesives may be difficult.
Perfect for the maintenance of home, camping and modeling equipment.
Water-resistant
APPLICATION:
The product is designed for bonding most materials used in the upholstery industry, such as fabrics, fibrous materials, jute, foam.
It is also used to glue cardboard, cork, leather, rubber to each other and to materials made of wood, concrete, ceramics, etc.
Intended for both indoor and outdoor use.
Do not use for gluing flexible PVC, EPS, XPS, PE, PP, PTFE polystyrenes
Find out how to take advantage
- 1 The parts to be glued should be thoroughly cleaned, degreased and, if possible, aligned.
- 2 Shake the container well before use.
- 3 It is recommended to apply the adhesive by holding the can at an angle of 70 degrees in relation to the surface to be glued.
- 4 Apply the adhesive on the surface and the element to be glued.
- 5 When gluing elements to porous surfaces, apply a second layer of glue after the first one dries.
- 6 Wait 2-5 minutes so that the adhesive does not transfer to your fingers when you touch it (depending on the temperature and air humidity, this time may change).
- 7 Press the glued parts together firmly and evenly.
- Before applying, check the action of the adhesive on the glued elements.
- The surfaces should be dry.
- When bonding to concrete surfaces, remove loose parts and residues of old paint coatings.
- Carry out work at temperature (10 ÷ 30)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Clean dirty tools and fresh stains with White Spirit.
- The full strength of bond is obtained after approx. 24 - 48 h.
- To prevent the spray nozzle from blocking, turn the container upside down at the end of each use and press down on the nozzle until the glue residue is removed from the valve.
Technical data
| SKU | DKUK500BE/AE |
|---|---|
| Ean | 5903649055446 |
| Grammage | 500ml |
| Color | Transparent |
| Type of bond | Elastic |
| Full bond strength | 24-48h |
| Applicability | interior or exterior |
| Joint/coating color after drying | Transparent |
| Typ produktu | solvent-based |
| Consistency | aerosol |
Security
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (15÷35) °C.
- Protect from sunlight.
- Low temperatures may cause the adhesive to separate irreversibly.
- Avoid freezing.