Dostawa od 10,99 zł
Zamów w przeciągu 02:21:32 a wysyłkę otrzymasz jutroKlej montażowy FIX strong White 140g Dragon
Klej montażowy FIX strong White 140g Dragon
Professional mounting adhesive intended for all finishing and assembly works.
Intended for finishing works in construction with excellent initial adhesion to typical substrates.
Replaces bolts, nails, dowels and screws.
It does not run off vertical surfaces, it is easy to apply and spread.
Klej montażowy FIX strong White 140g Dragon
Professional mounting adhesive intended for all finishing and assembly works.
Intended for finishing works in construction with excellent initial adhesion to typical substrates.
Replaces bolts, nails, dowels and screws.
It does not run off vertical surfaces, it is easy to apply and spread.
APPLICATION:
Perfect for gluing elements made of wood, metal, ceramics, glass, plywood, wood-like materials, PVC, polystyrene, polyurethane and others.
It can be used for gluing decorative elements, i.e. decorative ceiling and skirting boards, radiator screens, decorative tiles, plafonds, floor and wall coverings, floor and wall panels, laminates, etc., as well as for gluing mineral wool and glass wool insulation.
Can be used for gluing to all typical substrates used in construction.
The product is intended for use both indoors and outdoors in places not exposed to direct contact with water.
It does not stick to plastic: PP, PE, PTFE.
Advantages and benefits
Find out how to take advantage
- 1 Clean away any remnants of earlier painting.
- 2 The glued surfaces should be thoroughly cleaned, dusted and degreased.
- 3 Level the surface.
- 4 Cut off the tip of the cartridge and attach the dispensing spout.
- 5 Apply the adhesive in points or stripes on the substrate or the element being glued.
- 6 In addition, apply a drop on the corners and ends of glued objects.
- 7 Connect the glued elements and press them together for about 30 s.
- 8 Remove any excess glue.
- 9 Glued parts can be positioned without tearing off by approximately 10 min from the application of glue.
- 10 If the elements are under tension or are particularly heavy, immobilise them until the glue fully hardens.
- 11 After completing the work, close tightly the packaging with glue.
- Carry out work at temperature (10÷30)°C.
- The temperature range of works concerns the temperature of air, substrate and glued elements.
- Before applying, check the action of the adhesive on the glued elements.
- At least one of the glued surfaces must be porous and absorbent.
- The full strength of bond is obtained after approx. 24 h.
- Clean dirty tools and remove fresh stains with warm water.
- Remove dried dirt with an appropriate implement.
Technical data
| SKU | DKMFS140/TD/EH03 |
|---|---|
| Ean | 5903649088543 |
| Grammage | 140g |
| Color | White |
| Type of bond | Elastic |
| Full bond strength | 24h |
| Applicability | interior or exterior |
| Efficiency | 1.5-3m²/L |
| Joint/coating color after drying | White |
| Typ produktu | water-based |
| Consistency | paste |
Security
- Keep out of reach of children.
- The product is not intended for use on surfaces in direct contact with food.
- During and after the works, the room must be intensively ventilated until the characteristic odor disappears.
- Before use, read the technical data sheet/label/safety data sheet.
Storage and transport
- Store and transport in tightly closed, original packaging at a temperature of (5÷30) °C.
- Frozen glue loses its properties permanently.